Mk6 3 way memory error wont clear after reset

[Shaw]

Have an Australian mk5 machine with mk6 board
I have done a ram reset and replaced the batteries but I still can't clear 3 way memory error.
Any help would be amazing
Thanks

[Heihachi_73]

Is it an American machine or elsewhere? As you mentioned a MK5 to MK6 conversion (as opposed to names like MAV500/MVP540) I am going to assume it's Australia/NSW (or Europe/NZ/ASP/QCOM etc.) Once you've cleared the RAM you will have to set everything up in the machine options menu.

If it's an American machine however you will have to swap to the setchips in order to so the same thing because modern American video slots are still stuck in 1975.

[Shaw]

It's an Australian machine. Once I reset the ram and the machine options it still states to check lock ups and the only lock up is 3 way memory still.