New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/
« previous next »
Pages: [1] 2   Go Down

Author Topic: Rs232 comm daughter board questions  (Read 4811 times)

0 Members and 1 Guest are viewing this topic.

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Rs232 comm daughter board questions
« on: May 28, 2023, 07:32:51 AM »
Hello,
Having an issue with getting tito to work on my avp smld machine. I have several comm daughter boards but the all look like the one in the picture. Does it require a power harness? If it does require one, does someone have one or a picture?As I can't find ones without the 4 pin molex on it.
Any help is much appreciated. Thank you.
Logged

Offline RB

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3467
  • Reputation Power: 351
  • RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #1 on: May 28, 2023, 10:34:18 AM »
No additional power is required. It's probably something in your settings.
Logged
Quality doesn't cost. It pays.

Offline ChrisColumbus

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 292
  • Reputation Power: 24
  • ChrisColumbus New User barely matters.ChrisColumbus New User barely matters.
  • NLG
Re: Rs232 comm daughter board questions
« Reply #2 on: May 28, 2023, 12:38:05 PM »
As Ron stated no power to the RS232 only to tito. If you turn the lights out you will see that the RS232 will light up green and start flashing when you apply power to the TITO board. You will see a faint red flash here and there. Hard to see though
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #3 on: May 28, 2023, 02:15:48 PM »
My settings must be way off then. Tito says it's not communicating.
Logged

Offline RB

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3467
  • Reputation Power: 351
  • RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!RB Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #4 on: May 28, 2023, 07:58:54 PM »
Try this video and make sure your G2S is not enabled. Change line 2 & 3 to not required, then scroll down to the last line and choose no.

https://www.youtube.com/watch?v=JKjyeFQPltA
« Last Edit: May 28, 2023, 08:19:14 PM by Tilt »
Logged
Quality doesn't cost. It pays.

Offline ChrisColumbus

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 292
  • Reputation Power: 24
  • ChrisColumbus New User barely matters.ChrisColumbus New User barely matters.
  • NLG
Re: Rs232 comm daughter board questions
« Reply #5 on: May 28, 2023, 10:04:07 PM »
one more question, did you use the 9 pin cable that came with the tito? I wanted to add my tito in the topbox instead of the lower cabinet to get it out of the way. I bought a 6 foot 9 pin cable that would not work. there are straight through and null or crossover cables. one will not work. I think you have the have the null cable if I am not mistaken.
« Last Edit: May 29, 2023, 02:34:08 AM by ChrisColumbus »
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #6 on: May 29, 2023, 07:43:17 AM »
Changed the setting on the first picture by RB
Followed tge video and still get this error
Logged

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3891
  • Reputation Power: 237
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #7 on: May 29, 2023, 08:08:36 AM »
Did you change validation style from enhanced to system?
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #8 on: May 29, 2023, 08:25:00 AM »
Yes. Changed that setting to system.
Logged

Offline rickhunter

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 7523
  • Reputation Power: 446
  • rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!rickhunter Is an-NLG GOD!
  • Gender: Male
  • I Void Warranties.
Re: Rs232 comm daughter board questions
« Reply #9 on: May 29, 2023, 09:26:23 AM »
There are multiple com ports on the backplane, make sure you are selecting the right com port when setting up the port in the settings.
Logged
If you find the site helpful, consider becoming a contributing member.  It pays for costs and keeps this site alive.  I do not respond to requests for private, one-on-one help. Your questions should be posted in the appropriate forum where they may help others as well.

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #10 on: May 29, 2023, 10:10:27 AM »
Left most is number 1 and 2,3,4?



Logged

Offline a69mopar

  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2106
  • Reputation Power: 83
  • a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.a69mopar Is a force to reckon with.
  • Gender: Male
  • NLG
    • www.gtaslots.com
Re: Rs232 comm daughter board questions
« Reply #11 on: May 29, 2023, 10:23:08 AM »
Rick is onto something. your pic shows j141 which i believe is com 2 or 3.  try to match the setting,

W
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #12 on: May 29, 2023, 10:53:56 AM »
I tried all 4 comms in the setup and nothing changed. Same error.
Logged

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3891
  • Reputation Power: 237
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #13 on: May 29, 2023, 12:28:28 PM »
Did you try plugging into a different port, the one (of 4) you are using may be bad?
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #14 on: May 29, 2023, 02:07:33 PM »
Tried all 4 ports and used 3 different daughter boards.
Green Light never came on any of them from any port.
Logged

Offline sixcardmark

  • Sr NLG Member
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 3891
  • Reputation Power: 237
  • sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!sixcardmark Is an-NLG GOD!
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #15 on: May 29, 2023, 02:42:59 PM »
Are those boards for IGT or bally?  Can you post a pick of the position of the 3 com wires?
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #16 on: May 29, 2023, 03:24:00 PM »
Here are pics.
I also continuity checked the harness wires are good.
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #17 on: May 29, 2023, 03:44:16 PM »
Didn't turn machine on for these pics.
Which one is right?
Ended up resetting the machine making sure all settings were right it still had the same error and no green light on the daughter board. Don't know what else to try or do?
« Last Edit: May 29, 2023, 08:20:08 PM by karaoke mike »
Logged

Offline ChrisColumbus

  • NLG Member 251 to 500 Posts
  • ****
  • Posts: 292
  • Reputation Power: 24
  • ChrisColumbus New User barely matters.ChrisColumbus New User barely matters.
  • NLG
Re: Rs232 comm daughter board questions
« Reply #18 on: May 30, 2023, 03:30:04 AM »
is your pinout correct?


Here is a note I made when I made my cable. Sorry it is not the best. It is for a 9pin cable


also this pic of your is the correct way the comm board goes into your machine
Logged

Offline karaoke mike

  • New NLG Member 3 to 100 Posts
  • **
  • Posts: 58
  • Reputation Power: 5
  • karaoke mike New User has no influence.
  • Gender: Male
  • NLG
Re: Rs232 comm daughter board questions
« Reply #19 on: May 30, 2023, 09:41:40 AM »
The wiring harness for the tito to the daughter board came with the tito. It's the 5 pin to the tito. Tito powers by the usb and says it's not communicating with the machine. The green light has not turned on any of the 3 daughter boards I have tried. Either there is another setting that is not right that I know about or the backplane is not powering the daughter board.
Logged
Pages: [1] 2   Go Up
« previous next »
 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**


           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.

New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442



Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:


This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal