Author Topic: How to install a DVB 145 unit assembly in a Bally s5500 proslot upright slotmach (Read 9974 times)

Sunrise Side · « **Reply #40 on:** March 24, 2025, 06:24:07 AM »

Yes try another board. If it's not the board it may be the gearmotor . Not sure what adjusting screw you are referring to at the hopper bowl??

dutonP 1955 · « **Reply #41 on:** March 25, 2025, 09:20:11 PM »

Hi sunrise side how are you? The screw I'm talking about is a kind of spring loaded to adjust the pin wheel to were its looser or has more tension. so if a new board doesn't work should I try to adjust the screw by the hopper bowl to see if it makes the pinwheel turn like its suppose to and work?

Sunrise Side · « **Reply #42 on:** March 26, 2025, 02:21:51 AM »

There is no adjusting screw for the pinwheel. If you are referring to the 4 screws with springs on the outside edge of the bowl, those should be snugged up. Not adjustable. Maybe you have one or more of the 3 screws on the rubber agitator that holds the agitator, shelf wheel, and pinwheel assembly together, and one or more of the screws is to long and preventing the assembly from rotating?

dutonP 1955 · « **Reply #43 on:** March 26, 2025, 08:36:47 PM »

Hi how do you check those screws? and are they suppose to be a certain length like 6 inches?

dutonP 1955 · « **Reply #44 on:** March 26, 2025, 08:56:17 PM »

Hi mark how are you doing? It looks like none of the others are online but you and me so how are you?

Sunrise Side · « **Reply #45 on:** March 27, 2025, 04:38:42 AM »

You'll have to post pictures as to what you a referring to.

dutonP 1955 · « **Reply #46 on:** March 31, 2025, 09:25:04 PM »

Hi sunrise side how are you? sorry it took so long to respond. I can try to get the pictures posted tomorrow.
thanks.

dutonP 1955 · « **Reply #47 on:** March 31, 2025, 09:34:02 PM »

Hi sunrise side the screws I'm referring to are the ones that you said that could be to long keeping the pinwheel and agitator from moving properly.

Sunrise Side · « **Reply #48 on:** April 01, 2025, 07:08:18 AM »

OK. The agitator screws are not adjustable. If there is no play/slop back and forth of about an 1/8" when you move the pinwheel, the screws maybe to long . Replace them with shorter.

Sunrise Side · « **Reply #49 on:** April 01, 2025, 07:25:38 AM »

It's not jammed up with coins under the coin knife is it?

dutonP 1955 · « **Reply #50 on:** April 07, 2025, 09:39:56 PM »

Hi sunrise side no it's not Jamed up with any coins should I see if it moves back and forth freely?

Sunrise Side · « **Reply #51 on:** April 08, 2025, 06:29:18 AM »

I asked you earlier if there is a small amount of play by trying to rotate it back and forth by hand

Sunrise Side · « **Reply #52 on:** April 08, 2025, 06:31:28 AM »

I service these hoppers. Send it to me for repair and testing. PM me a message or email for details. tkrozleski@hotmail.com

dutonP 1955 · « **Reply #53 on:** May 12, 2025, 09:53:02 PM »

I sunrise side long time no hear I been really busy trying to find a job. anyway I am looking for my s2000 post title and cant seem to find it. If a post is inactive does it get wiped out? please pm me let me know thanks. and tell mark I said hi.

dutonP 1955 · « **Reply #54 on:** May 12, 2025, 10:04:24 PM »

Hi sunrise side I finally got a chance to get your address to send you that hopper so you can service it please let me know what your price is to service it thanks.

sixcardmark · « **Reply #55 on:** May 12, 2025, 10:18:36 PM »

Click on this link for all threads you started: https://newlifegames.com/nlg/index.php?action=profile;area=showposts;sa=topics;u=10456

Sunrise Side · « **Reply #56 on:** May 13, 2025, 03:52:02 AM »

Your inbox in your messages is full and I can't send you a PM. Clean out your inbox

dutonP 1955 · « **Reply #57 on:** May 13, 2025, 11:48:47 PM »

Hi sunrise side I cleaned some of the message you should be able to pm me back thanks.

dutonP 1955 · « **Reply #58 on:** May 15, 2025, 04:20:53 PM »

Hi sunrise side I lost your address to send my hopper to you for repair can you send it to me again? thanks.

Sunrise Side · « **Reply #59 on:** May 17, 2025, 04:34:23 AM »

I sent PM to you. Take a look in your inbox

News:

NLG Site Navigation Menu

Author Topic: How to install a DVB 145 unit assembly in a Bally s5500 proslot upright slotmach (Read 9974 times)