New Life Games LLC

**Reel Slots** Gaming Machines => SIGMA Reel Games => Topic started by: Ash100 on December 09, 2019, 06:19:03 PM

Title: Sigma SG300 Yahtzee Hopper Empty Message
Post by: Ash100 on December 09, 2019, 06:19:03 PM

Hello all,


I hope someone can help out with this one, as I know Sigma stuff isn't popular and a lot of the masters are retired and not following this page any longer.


I've got a Yahtzee game that was working and playing fine for the last 2 months (just purchased it from a Senior Member here) and now all of the sudden I get a Hopper Empty error that locks up the machine.


I've filled the hopper, bench tested the hopper motor, cleaned the coin out optics and checked the Hopper PCB for loose connections. I know the optics work because I can get the game to give me a coin out/coin jam error when they are blocked by the tab when the coin passes through the output chute.


That's about all I can do short of throwing parts at it, which aren't available anyway.


Anyone have any other advise or places to check. I know which plug feeds the MPU, which I have also pulled and inspected, re-seated, etc.


The game boots, goes right into Hopper Empty and won't reset. I can turn the JP Reset Key, get the reels to spin then the alarm sounds again immediately which prevents me from going into the test/diagnostic mode to check operational features.


If anyone has any spare SG300 parts (MPU or Hopper PCB) or knowledge they'd like to share, I would be very grateful.


Thanks, Curtis ash100

Title: Re: Sigma SG300 Yahtzee Hopper Empty Message
Post by: Ash100 on January 16, 2020, 05:57:10 PM

Well, it fixed itself.


Too bad there's not much help in here. Sigma stuff is tough and not many people work on them.

Title: Re: Sigma SG300 Yahtzee Hopper Empty Message
Post by: LuxuriousBastard on February 17, 2022, 12:17:04 PM

I have an SG 300...Mine wont activate the hopper when I hit the cash out button. I bench tested the hopper motor and it does work. I also checked the button...it also works.