New Life Games LLC

**Reel Slots** Gaming Machines => Bally Alpha Reel Games => Topic started by: Papacon78 on October 18, 2021, 05:16:54 PM

Title: 1st alpha pt 2
Post by: Papacon78 on October 18, 2021, 05:16:54 PM

Per my previous post. New to me Alpha. Got the clear card and set it up. It works. 2 issues. The top of the candle won't stop blinking and the printer will only do a void ticket. I'm pretty sure the printer issue has to do with a setting I did wrong the candle I have no idea. Looking for thoughts.

Title: Re: 1st alpha pt 2
Post by: sixcardmark on October 18, 2021, 05:20:17 PM

Which printer do you have?

Title: Re: 1st alpha pt 2
Post by: Papacon78 on October 18, 2021, 05:25:11 PM

Future logic 232 I believe.

Title: Re: 1st alpha pt 2
Post by: sixcardmark on October 18, 2021, 05:33:13 PM

Choose Seiko as your printer

Title: Re: 1st alpha pt 2
Post by: Papacon78 on October 18, 2021, 05:35:18 PM

I don't recall that as an option. I think the printer issue is a protocol thing when setting up. Any ideas on the candle?
.

Title: Re: 1st alpha pt 2
Post by: sixcardmark on October 18, 2021, 05:38:27 PM

There should be that option.  Candle will flash until you get correct printer installed.

Title: Re: 1st alpha pt 2
Post by: Papacon78 on October 19, 2021, 01:30:16 PM

If the paper is low, will the candle blink as well?

Title: Re: 1st alpha pt 2
Post by: sixcardmark on October 19, 2021, 01:34:06 PM

Yes I believe so, not sure.

Title: Re: 1st alpha pt 2
Post by: Papacon78 on October 19, 2021, 01:36:12 PM

I figure I need paper anyway, might as well find out. In the attendant menu that's the only "error" that's listed.