New Life Games LLC

NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: Paul on October 10, 2015, 08:57:46 AM

Title: MEI SC66xx Software Upgrade
Post by: Paul on October 10, 2015, 08:57:46 AM

I have 2 that need the new update for the new bills.
PM me the cost .

Title: Re: MEI SC66xx
Post by: firebird71 on October 10, 2015, 09:00:50 AM

For what machines do you need the update for? Also, do you have the programming software STS?

Title: Re: MEI SC66xx
Post by: Paul on October 10, 2015, 09:06:51 AM

Sorry
Its for the Aristocrat MK6 machine and
I have two heads that I need flashed.
I don't have any of the flashing hardware so
I would like to send out the heads to someone
that can flash them.

Unless some one can loan me the tool to flash
the heads myself.

Title: Re: MEI SC66xx
Post by: firebird71 on October 10, 2015, 03:22:18 PM

If you have a computer, all you need is the program loaded on your computer and a USB line.
The STS program will allow you to program and test MEI heads with a PC or laptop.

Title: Re: MEI SC66xx
Post by: Paul on October 10, 2015, 04:04:48 PM

Ok, but where do you get these programs?

Title: Re: MEI SC66xx Software Upgrade
Post by: firebird71 on October 11, 2015, 09:01:00 AM

Program is available from any MEI vendor or licensed repair site.

Title: Re: MEI SC66xx Software Upgrade
Post by: Paul on October 11, 2015, 10:11:08 AM

Ok, but the cost to buy the software just to update 2 heads is too expensive.
That why I was looking to pay some one to update them for me.

Title: Re: MEI SC66xx Software Upgrade
Post by: Paul on October 11, 2015, 10:10:02 PM

 :thank_you: :thank_you: :thank_you: :thank_you:
OK, Ive had several people tell me that all i need is to down load the STS program
but for the life of me it can't be found.
Mei says call for pricing, Suzo Harps says that the software is not available.
So unless some one can point me to a working down load or email me the STS program
I'm back to looking for some one to flash my two heads or a loan of the yellow programmer
that MEI offers.
I expect to pay round trip mail cost and a flashing fee but so far it looks like no one
is interested in helping.

 :wtf1: :wtf1: :wtf1: :wtf1: :wtf1:

Title: Re: MEI SC66xx Software Upgrade
Post by: firebird71 on October 12, 2015, 08:46:38 AM

I have the program and the newest firmware, but I do not have the setup for flashing them, i.e. MEI chassis, cash can, and 12V power supply.

I mean, I have it at work but they would not allow outside equipment to be flashed there.

Title: Re: MEI SC66xx Software Upgrade
Post by: Paul on October 19, 2015, 10:15:15 PM

MEI BV Wires

Title: Re: MEI SC66xx Software Upgrade
Post by: firebird71 on October 20, 2015, 06:53:59 AM

Is there a question involved in this picture sir?
The yellow wire harness should plug into the harness that goes back to the backplane board for the BV.

Title: Re: MEI SC66xx Software Upgrade
Post by: Paul on October 20, 2015, 07:40:55 AM

No, a member (tjlee) was asking which
wires where used and I posted the picture here.
With MEI heads there is only 2 types - IGT Netplex and  non IGT Netplex.

tjlee is going to flash my heads for me so this thread is done.

    :thank_you:  :thank_you:  :thank_you:
To everyone that helped