Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff > Pinball Games
Bally 1979 harlem globetrotters
woilly:
Hi
I have a bally globetrotters pinball 1979 having a little problem but i can't find it.
When i activate the flippers , outhole kicker, points are incrementing on displays for no reason?
anybody have a clue on this ?
mpu as-2518-35
selenoid driver as-2518-22
rectifier board as-2518-18
lamp as-2518-23
thank you
br549autosales:
There is a leaf switch on your playfield somewhere that is too close and the vibration of the flippers, pop bumpers, top hole eject and slingshots will cause them to touch and score points. Do this slide your playfield glass off and start a game. Tap the middle of your playfield with your hand lightly then progressively harder until you hear the points ring up. Note how many points it is each time, 100, 500, 1000. Then look at what scores that point value such as stationary targets, lane roll overs, drop targets, etc. Most of the time on that particular machine it is one of the 5 stationary targets on the left side. Then adjust the switch just a little wider apart until the vibration will not cause it to make contact with each other, just insure that the ball will though when it hits it during game play. Hope this helps and good luck, that's great machine to have!
woilly:
Hi
Thank you very much for the hint!
This is a good thing to try.
I will do it and get back to you with the result.
I already checked everythings on the selenoid board and every parts are good.... i will try your testing method...
Thank you very much
The Fatman:
You can also enter into the switch test and watch for the number to show when you tap the playfield.
Dave
buybestslots:
:I_agree_1: also might be a loose diode either way a easy fix
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |