New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: The Fatman on February 24, 2017, 11:03:15 PM
-
I have had a friend in ... yes Port Richey Fla. ... repair or replace my boards. I have a 1000 and a 2000. Right now, I am addressing the E-1000 machine. I have the board installed and get more than I have had before. But after powering up, I dont get anything but it goes back and forth with solenoids activating and after about 30 seconds ... blows the 5V fuse on the hopper. Got a clue on where I need to go? I know the cpu and the IO boards are good because Barry F did them. These are my first E machines and am almost getting ready to give up because the EM machines I work on, I have never had one I couldn't get right ... Thanks to Old Reno
Dave F
-
Hopper board possibly. Barry has new if needed.