New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: DirtinLa on March 31, 2017, 08:10:26 PM
-
Fixed 81 fixed 83f
drop in a coin and it goes straight to the hopper NO CREDIT
has a green light on the coin mech that is on?
suggestions, tried different coins in the comparator too?
Thanx in advance
-=Fred=-
-
I got one exactly like the one you have. . Move your quarter around in your comparator. It might not be comparing with the quarter that goes by very good . You say the light is on..check that connection that goes to that little board. I had to replace that little board on one of my machines cause that censor quit working . Bob on this site got me one .
-
Thanx I'll double check
-
on mine I had to decrease the 'sensitivity' a little bit before it started working accurately all the time. i think it's because mine is an older comparitor and with the newer and variety of quarters these days, it wasn't likely the variance.
-
Make sure that your coin mech switch on the mpu is in the up position.
-
I said we replaced the battery on the 81 code and then did a reset on the 83f code by doing a jumper reset on the MPU.
Come to find out the jumper had a plastic cover. In doing the reset the tiny metal piece inside of the cover got left in place lol
and wasn't noticed til we did another reset procedure. lol Once we did a proper reset actually moving the metal jumper it worked!
As always thanx to everyone for your help here it is much appreciated.
-=Fred=-