New Life Games LLC
TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Toppers => Topic started by: slotdoofus on October 17, 2016, 06:43:45 AM
-
I went to install this topper on one of my Bally S6000 machines. It won't fit...the threaded rods on the bottom of the topper base are too far apart. I bought this topper thinking it would fit my S6000.
I guess I was wrong.
-
What spacing do you need?
-
I need this topper to fit the stock candle holes that are in the cabinet, (1 1/4 inch apart).
The spacing between the threaded shafts on my topper is 1 3/4 apart.
-
You can get it to fit, just drill new holes for the topper.
That's what I did with my S6000.
I posted on the old site for help with installing mine.
Here is a link...
http://newlifegames.net/nlg/index.php?topic=7799.0 (http://newlifegames.net/nlg/index.php?topic=7799.0)
Good luck!
-
Any idea on the power supplies needed?
-
I ended up instally this topper on a S9000 machine.