New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => WMS Williams Video => Topic started by: Jester34 on December 11, 2016, 07:22:42 AM
-
Good morning
I have a WMS Star Trek machine. It's been working great. We came in to the room and the machine was on but both monitors showed No input
The board CPU fan is running and some leds are lit.
Any help would be great
Thanks in advance
Al
-
What happens if you power cycle? The video board on the bb2 mpu's is a part that fails most often. It would give you the error that is on the screen. Do you have another mpu to try? Since it is both monitors, it is unlikely that both A/D boards in the monitors would have failed. But you can test the monitors by hooking them up to a pc to see if images show up. If they do, then it's your MPU. Maybe someone close to you has a similar system to try your mpu on their cabinet?
-
Sorry for the long delay
It ended up the board was bad. It was replaced and is working fine now.
I got very busy at work
Thank you for the replies
Now I have about 500 more questions on some other games. :EmoticonHelp4:
Al
-
My next issue with Star Trek
Any help would be great
:thank_you:
Al
-
Did you run a clear?
-
Yes 4 times ?
Hmmmmm
-
I would think Game CF is corrupt, you said it was working ok before.? can you post a pic of the card?