New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Pot-O-Gold => Topic started by: Nepa Coin Op on May 14, 2014, 02:21:20 PM
-
I have a T340 v580 board and harness only here I am trying to make something out of.... I power the board up and it goes through the cheksum then asks me to flip the admin switch which the harness I believe has but cant confirm since I dont have an edge con pin out for this....... then it goes to the ram.... ram 1 gives a value ram2 says disabled with a box that comes up briefly on the right side that goes away before I can read it ... Then goes back to the 1st initialize box...... What is wrong here ???
-
Greetings from NC,
[/size]
[/size]
[/size]THAT MY FRIEND....MEANS TO TURN THE SUPERVISOR SWITCH AGAIN AND IT WILL RESET BACK TO FACTORY DEFAULT AND LOAD TO THE OPERATOR MENU BRAND SPANKING NEW!!!!
-
THAT MY FRIEND....MEANS TO TURN THE SUPERVISOR SWITCH AGAIN AND IT WILL RESET BACK TO FACTORY DEFAULT AND LOAD TO THE OPERATOR MENU BRAND SPANKING NEW!!!!