New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => BALLY Game Maker => Topic started by: don275 on December 13, 2017, 02:27:48 PM
-
could some one sent me a picture CLOSE UP SO I CAN FOLLOW THE WIRES TO PLUG. of bally game maker 7217 harness wire for 11 pin coin optic board and plug that it fits in so i can make up a harness ,i think it goes to the square 12 pin connector in picture,tried for a month to purchase one no one has for sale, would be much appreciated,its a christmas gift and time is running out,so i have to MAKE UP A HARNESS TO GET IT WORKING ,thx merry Christmas
-
Does your set up look like this?
Duh... never mind mine is a 7000 :banghead:
-
don275,
Your in box is full.
"Hello, I don't have exactly what your looking for but, I think we can get close. I went into my parts pile and found a setup from a Bally bar top/slant top. It uses the same optic board and has the wires that look the same as yours. It may be 1 or 2 colors off. I'll post a quick photo of it and put it on the message board. When, I get back home I will give you a wire color per pin."
-
ok great ,i dont even know where the plug goes too ,looks like 2 different plugs running from optic board on your setup, mine could be the same i have no idea ,they were gone when i got the machine,thx for your help ,.
-
Hopefully this will help. You will need to double check the wire colors. Also, there are two wires going to your diverter coil. On this they at orn/blk and yel/blk.