New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Badbaud on September 18, 2018, 11:12:09 AM

Title: IGT S+ with WBA silver power supply?
Post by: Badbaud on September 18, 2018, 11:12:09 AM

I sent the customer a working and updated WBA bill validator and one of those silver power supplies.There is a 4 pin header on the WBA and he says the 5 pin connector on the power supply is to big to fit there, says his last power supply had a 4 pin connector that fitted there.
I thought that 4 pin header was never used and the 5 pin from the power supply plugs into a dangling connector hanging off the back of the main BV connector.
Who is right?

Title: Re: IGT S+ with WBA silver power supply?
Post by: sixcardmark on September 18, 2018, 01:46:53 PM

Quote from: Badbaud on September 18, 2018, 11:12:09 AM

Who is right?

You are right.  Should be a 5 pin dangling from BV that goes to silver power supply 5 pin.

Title: Re: IGT S+ with WBA silver power supply?
Post by: Badbaud on September 18, 2018, 02:35:32 PM

Thank you.

Title: Re: IGT S+ with WBA silver power supply?
Post by: sixcardmark on September 18, 2018, 02:41:03 PM

The only thing that doesn't match up is a 4 pin from BV goes to a 2 pin to light the BV bezel.

Title: Re: IGT S+ with WBA silver power supply?
Post by: Badbaud on September 18, 2018, 05:36:49 PM

I'll let him know. I never got to work on a S+ with a WBA so don't know much about them.