New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Lamikal49 on July 06, 2014, 05:51:08 PM
-
Hi sorry for my english,
I have an IGT S2000 slot machine with the WBA 13SS USA installed.
I want to change it for a Bill validator who accept the news canadian bills.
Do you have some suggestion ???
Thanks
-
All the members will see this eventually and hopefully one of the dealers or one of our Canadian members will have the chip to help you out. Being a WBA13ss I would think it has a socketed chip for easy upgrade. If it doesn't then you will need to have it flashed. Look on the underside of the validator head to see what you have for sure and let us know. After that, be patient, if someone has what you need they will respond
-
On a related note I heard there is someone in Arizona that has the updated bin for the WBA that allows it to accept those new Chinese looking 100 dollar bills, is this true?
-
I just got off the phone with one of the other members and he corrected me on one thing and added some background on another. The board you want to look at to see if it is flash or chip type is on the bottom of the bill transport and he said your BV heads may not work for Canadian bills because the American head has 3 sensors in it and the Canadian head only has/uses one. This will be something you want to confirm before spending any money on software upgrades. It might end up being cheaper to keep a stack of American money around or adding tito capabilities if your machines have printers.
-
You will need to get the Optically enhanced head. It has only one magnetic sensor, but two more optical sensors than the US version. You will also need a different set of Guide rails because the Canadian bills are wider than US bills.
-
I see the 3 sensors in it. So if i want canadian bill validator i must change all the kit ?
What i can use instead a WBA13 ?
-
We have some untested wba 22 validators from. Flash programmable