New Life Games LLC
NLG Classified ads and White Sheet => NLG Classified ads and White Sheet - PLEASE READ DESCRIPTION BEFORE POSTING! => Topic started by: Jimise on August 03, 2014, 01:46:10 PM
-
Looking for a sentry bezel for a 17" IGT I Game / Game King.
Thanks! :yes:
-
If you find one let me know the source. I didn't think these existed for a 17" upright.
Jason
-
I didn't either until I saw this picture....
If you find one let me know the source. I didn't think these existed for a 17" upright.
Jason
-
Ok then...can I piggyback on this request then?
Thanks,
Jason
-
You got it!
BTW, Love your lucky larry game! Ok then...can I piggyback on this request then?
Thanks,
Jason
-
You got it!
BTW, Love your lucky larry game! Ok then...can I piggyback on this request then?
Thanks,
Jason
Gotta love ol' Larry!
Jason
-
Doesn't it just attach from the back the same as S2000? There was one on Ebay this morning. Roz, at CV had several a while back
-
We may still have a few actually.
Jim / Jason - Let me know of you want to me to check for you.
Roz :propeller:
-
We may still have a few actually.
Jim / Jason - Let me know of you want to me to check for you.
Roz :propeller:
Yes please Roz.
Jason
-
Yes Please!
Jim.We may still have a few actually.
Jim / Jason - Let me know of you want to me to check for you.
Roz :propeller:
-
We may still have a few actually.
Jim / Jason - Let me know of you want to me to check for you.
Roz :propeller:
Could you check and see if you have one that will work on my Game King slant top?
Thanks, Gary
-
Gary - I think we have a specific listing for Slant Top sentry bezels...PM if you don't find it.
-
Forgive me for adding a request, but Roz, IF you do have these available for a 17 like Jim is requesting, I would also like one. Thanks.
Chris
-
Hi Roz,
I was looking at my 17" upright, and I'm not sure how to get a Sentry to work. Isn't the Sentry pictured below for an S2000? I also includes a pic of what's on my machine.
Thanks,
Jason
-
Oops, my photo is upside down.
Jason
Mod note: Corrected for you.
-
Ok guys, I have 3 Sentrys in hand, set aside for Jim, Jason, and Chris (Gary, i sent you a PM).
Now, we have I-Games with and without them. Our Panda cabinets have them, our old 16" I-Games do not. If you currently have the little yellow sign that lights up, then you can swap out the yellow part for the Sentry.
We do not have any of the black door bezels that the Sentry installs in. Just wanted to clarify that.
Roz
-
You guys need different door bill bezels, THEN you can install the Sentry (if you find a bill bezel without one).
-
Ok...I might be outta luck then. Unless somebody has the door bezel.
Jason
-
I checked this thread out and most all are correct here. I have the sentry displays-(new) and most likely have the bezels also packed away. Clarifacation on just what is needed -one or both and during the week will look -once again while filling orders as it would justify it at that point. 777.
-
I'm sorry we couldn't help guys...maybe some will pop up somewhere.
-
Hi Roz,
Sorry if there was any confusion.
But thank you for taking the time to try and find them for us! :thank_you: I'm sorry we couldn't help guys...maybe some will pop up somewhere.
-
Hello sizzler!
Thanks for jumping in here!
I would like 2 of the black bezels for the 17" GameKing, and 2 of the sentry inserts that go in the bezels.
If you do have them, that would be great! Thanks, Jim.I checked this thread out and most all are correct here. I have the sentry displays-(new) and most likely have the bezels also packed away. Clarifacation on just what is needed -one or both and during the week will look -once again while filling orders as it would justify it at that point. 777.
-
Will do and will look as going thru stuff. It all should be here as I have already responded to the pms. No biggie, The items are needed, First to come up with and serve, No problem as stay busy here with the slot gaming equipment and other, I do have a rep. for delevering the goods at times though. 777
-
I did look some today while extracting other parts/etc. No luck yet here. Lot's of stuff to look thru yet -just takes time. For as many folks that are interested in these if any others become avail. I say Grab em!!.
-
Bump for the weekend...... :Tongue_Out:
Still looking :yes:
-
OK, one more bump for the weekend :)
Thanks everyone !
-
Was it determined that the S2000 works? Or only that the sentry would work with the yellow insert?
-
After looking around, I found some here. Looks great!
http://patriotgaming.com//catalog/sentry-bezel-p-5057.html?osCsid=261aea9d393a0b52df31a401936eda7e (http://patriotgaming.com//catalog/sentry-bezel-p-5057.html?osCsid=261aea9d393a0b52df31a401936eda7e)
-
Did you order one?
Jason
-
Yes I got one, really easy to install.
Did you order one?
Jason
-
Now if I could only locate one that would fit my Game Kings bill acceptor.. They are a little bit bigger and mount below the bill slot, instead over it.
Gary
-
After looking around, I found some here. Looks great!
[url]http://patriotgaming.com//catalog/sentry-bezel-p-5057.html?osCsid=261aea9d393a0b52df31a401936eda7e[/url] ([url]http://patriotgaming.com//catalog/sentry-bezel-p-5057.html?osCsid=261aea9d393a0b52df31a401936eda7e[/url])
Son of a!!! You snooze you lose. I was going to order one of these this morning and now the 'ol 404 comes up.
Jimise, do you have a part number for this? I'm going to call them on Monday to see if they have anymore. Or for that matter, does anyone out here have one?
Thanks,
Jason
-
Jason, I sent you a PM....
After looking around, I found some here. Looks great!
[url]http://patriotgaming.com//catalog/sentry-bezel-p-5057.html?osCsid=261aea9d393a0b52df31a401936eda7e[/url] ([url]http://patriotgaming.com//catalog/sentry-bezel-p-5057.html?osCsid=261aea9d393a0b52df31a401936eda7e[/url])
Son of a!!! You snooze you lose. I was going to order one of these this morning and now the 'ol 404 comes up.
Jimise, do you have a part number for this? I'm going to call them on Monday to see if they have anymore. Or for that matter, does anyone out here have one?
Thanks,
Jason