New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: 61Wally on November 04, 2021, 01:11:28 AM

Title: s2000 triple double stars issue.
Post by: 61Wally on November 04, 2021, 01:11:28 AM

On this machine, I believe the chips are wrong. These 2 pictures paid out weird. First one paid out nothing and 2nd one paid out 400. Also the denomination light in the front acts like it’s a multi-denomination machine. Any suggestions would be fantastic. THANK YOU.

Title: Re: s2000 triple double stars issue.
Post by: RB on November 04, 2021, 04:31:12 AM

SB100272. Strips are AAB. Set multi denom touch panel to buttons 1,2,3 & 4 for denom 1 in key chip menu 7.1.1.4.

Title: Re: s2000 triple double stars issue.
Post by: 61Wally on November 05, 2021, 06:19:56 PM

Thank You for the info. This is a picture of what’s on my board. Is this correct?

Title: Re: s2000 triple double stars issue.
Post by: Tilt on November 05, 2021, 06:28:32 PM

No.  That's a 5X Gold SB chip.  Usually SG598's are used on 1270 boards.  SG363's are used on the 50X series boards.  I'd replace all of them.  RB can help you with that.

Title: Re: s2000 triple double stars issue.
Post by: 61Wally on November 05, 2021, 07:03:02 PM

OK, I will try and get in contact with him. So my understanding is that the machine is a multi- denomination game?

Title: Re: s2000 triple double stars issue.
Post by: Tilt on November 05, 2021, 07:38:51 PM

Your 6-6-3 display is capable of it, but you're missing the touch sensor (and denomination label)  that goes in front of the LEDs.  It's probably missing the small cable that attaches to it as well.  You can use it as a single denomination machine if you want to or find the rest of the parts if you want to make it a multi-denomination touch machine.

Title: Re: s2000 triple double stars issue.
Post by: RB on November 05, 2021, 08:39:16 PM

I have a touch pad with harness as well as the chips if you want to set it up multi denom. PM me if interested.

Title: Re: s2000 triple double stars issue.
Post by: 61Wally on November 06, 2021, 03:28:46 AM

OK GREAT, I noticed when I Was trying to program it, The prompts somewhere wanted me to set up 4 denominations. I got confused at that point and only put in one.
What is the best way of touching base with YOU (RB), as far as obtaining the correct components that I would need. Here is a picture of the inside where I think I would need a little jumper cable, like I see on my other multi-denomination S2000.
I got really confused on my other MD S2000 programming it. I’m the “DEMENTIA DAN”, guy that everyone has been so kind and patient with. I have misplaced all of my manuals, so it’s been difficult programming my machines. I’m thinking, I left them in the trunk of my car that got totaled when this lady T-BONED me recently. THANK YOU SO MUCH FOR YOUR ASSISTANCE.