New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM DBV-45, DBV-145, and DBV-200 Bill Validators => Topic started by: brooker on January 10, 2015, 02:22:50 PM

Title: dbv 200
Post by: brooker on January 10, 2015, 02:22:50 PM

how i can programmating for other country bill

Title: Re: dbv 200
Post by: CVslots on January 10, 2015, 04:03:22 PM

You will need to acquire the EPROM for the appropriate country, but I am not certain what countries were supported for the DBV. If you were to upgrade the validator to a WBA (World Bill Acceptor) or a UBA (Universal Bill Acceptor), then you will have more options.

Title: Re: dbv 200
Post by: brooker on January 10, 2015, 07:11:35 PM

ok im living in dominican republic.. where i can find the eprom.. and how is do it... i have a bally gamemaker

Title: Re: dbv 200
Post by: Harp on January 11, 2015, 03:53:04 AM

JCM did not produce any firmware for the DR using the DBV200

Title: Re: dbv 200
Post by: brooker on January 11, 2015, 10:01:09 AM

is not way this work here

Title: Re: dbv 200
Post by: Harp on January 11, 2015, 10:13:23 AM

USA Currency or local Dominican Currency?

You can check at this JCM link that DR Currency is not supported for the DBV200
http://www.jcmglobal.com/en/support/downloads/SoftwareInfo.aspx (http://www.jcmglobal.com/en/support/downloads/SoftwareInfo.aspx)

Title: Re: dbv 200
Post by: brooker on January 11, 2015, 10:34:32 AM

dominican currency........i check the software and only dbv 300.. i can install dbv 300 in a gamemaker :Scratch-Head: