New Life Games LLC

Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: fandy on July 15, 2015, 11:14:33 PM

Title: To run promotional messages to the overhead supreme display
Post by: fandy on July 15, 2015, 11:14:33 PM: Good Day To All,

First of all I would like to say hello to everybody and God Bless .

Guys, I have everything here but somethings missing maybe your helping mind. I do have the supreme display,mikohn controller,PC with DOSBOXPSP installed. The only thing that I wanted to have is that to run some promotional messages on our poker supreme display.
I already configured the jackpot but i'ts not a link becuase I just received the break out board and I need to wait more time to do ram clear beacuase we are still in operation at this time . I did some messages on mess.do and as you can see on the picture it shows file sending mess.do. I tried to connect to the supreme but it didn't works.

Did I missed up the connection or something? Any helps will be much appreciated.

Thanks

Fandy
Title: Re: To run promotional messages to the overhead supreme display
Post by: qbert on July 16, 2015, 06:50:09 AM: What controller are you using to drive the jackpot value?
Try adding your message to the jackpot.do instead of the mess.do
Title: Re: To run promotional messages to the overhead supreme display
Post by: fandy on July 16, 2015, 07:50:19 PM: thanks for the reply I have CON2-V2.05 and CON2-V4.01. I used to do this in the other ships but I had a doubt for U17eprom becuase it's removed .

Best Regards.

Andy.
Title: Re: To run promotional messages to the overhead supreme display
Post by: knagl on July 23, 2015, 09:56:43 PM: It's been a few years since I've done any Supreme programming, but I seem to remember that I would send the files to the display using the Mikohn Windows Download program, not PSP.
Title: Re: To run promotional messages to the overhead supreme display
Post by: fandy on July 24, 2015, 05:46:26 PM: Thank you for the info. I will try to do with Mikohn windows download program and I will post the result . Thank you once again.