Bill Validators, Currency Acceptors and Printers > Other Bill Validators
UBA 14 Won’t Accept New Bills
tomterlec:
I’m looking for some assistance with a UBA 14 that won’t accept colored bills. This is the first UBA I have worked with, I installed this in a Game King and removed a WBA 13.
Currently it will only accept $1’s, rejects everything else. The firmware according to the label is 2.82-37, I think that should work if the label is correct. I have no way to verify what’s installed.
I had to switch the boot EPROM to match ID 24, it says it’s V 1.26. I’m wondering if the boot version isn’t correct? Any thoughts appreciated.
tomterlec:
Bump, still looking for feedback.
Slotman:
That gameking will tell you what firmware is installed in it.
I forget the exact area but I think its somewhere in meters.
RB:
This is what i use on UBA 14/24 for ID024 with Boot V1.29. V2.82-37 might require a different boot. I do not have documentation of that version.
tomterlec:
--- Quote from: RB on November 22, 2022, 08:27:46 AM ---This is what i use on UBA 14/24 for ID024 with Boot V1.29. V2.82-37 might require a different boot. I do not have documentation of that version.
--- End quote ---
Thanks RB. I have a boot v1.29 but it shows ID-028. In the software info sheet, it shows the boot as ID-024/ID-028. Should I try this boot chip?
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |