New Life Games LLC
**Reel Slots** Gaming Machines => Universal Reel/Video Games => Topic started by: Nepa Coin Op on February 01, 2016, 04:34:46 AM
-
I have one here with an 8116 board...... board had light corrosion. I replaced the 6116 with a known good one, known good z80 and new socket under 6116.... Game now boots up BUT heres what it does..... itll coin up but as soon as you pull the handle it gives a tilt error... reel 1 dont even try to move...... when you try to reset it cycling the door switch makes the coin in and coin out meters chatter not count up but chatter.... they dont count coins in either.....I tracked those back up through 7406 and 259 chips which seem to be good.... in the self tests everything works and checks except for the reels...... somewhere in the addressing its sending signal to the coin in/out meters instead of the reels....... is anyone familiar enough with the layout of the board to point me in the right direction ????? I also verified the game rom file... I didnt reburn a rom but checked it in the burner and it verified.... im very close but stuck..... if someone has a fluke 9010 z80 pod to sell or let me borrow that would reallllllly help right now .... all input is appreciated
Thanks