New Life Games LLC

Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Bikr420 on July 08, 2023, 08:01:52 AM

Title: wba 13 in igt s+
Post by: Bikr420 on July 08, 2023, 08:01:52 AM: recently came across ten times pay igt machine that didnt have a bv so i purchased the complete unit with harrness and set 15 chip. went thru the instructions set 91-1 set 25c same swap back over to game prom. run test on bv it accepts bills and stores them set all switches back to normal operation start the machine up it cycles and thats it. wnet thru a couple different threads on here for trouble shooting and nothing has worked so i am here asking now. currently the bv cycles it take quarters and runs normal besides it wont accept bills and no light for bill slot
Title: Re: wba 13 in igt s+
Post by: sixcardmark on July 08, 2023, 08:32:05 AM: Which firmware does the WBA13 have? It needs ID022/23 for S+. It may have ID024 firmware which won't work on S+. What does the chip on the bottom of unit say?
Title: Re: wba 13 in igt s+
Post by: Bikr420 on July 08, 2023, 08:38:01 AM: it has the ido23 chip
Title: Re: wba 13 in igt s+
Post by: sixcardmark on July 08, 2023, 09:09:21 AM: What is the credit limit set to?
Title: Re: wba 13 in igt s+
Post by: Bikr420 on July 08, 2023, 10:38:00 AM: not sure havent messed with anyhthing besides the set chip settings
Title: Re: wba 13 in igt s+
Post by: Badbaud on July 08, 2023, 03:43:32 PM: It's been years but I coulda sworn that on a slant top s+ there was a DIP switch that had to be turned on in the BV for a WBA to work.