**Reel Slots** Gaming Machines > Universal Reel/Video Games

Universal (pacific) RAM clear

(1/1)

Rens:
Hi Guys,

I have a Pacific 5 Real (Universal Australia) Game Fire Bird 2.

Searching here I have not found too much on the unit.
Via a local NZ pinball group I did get in touch with an old field service agent..

My error "Game invalid, meter error"  according to him should clear with a RAM reset.

He went by memory and gave me some instruction as he was not 100% sure on his recollection I thought I'd run them trough here for confirmation if possible on the procedure.


The game/mother board is a 8600-A3F
The instructions I got is to jumper the test point/pin next to C7 and jumper it accross to the reset switch
(not sure which point on the switch)
and then power the unit on with the reset switch held.
after a few seconds while still holding reset, power off the unit.


Does this strike any bells with anyone and anyone then sure on which point on the reset switch to jumper too?

UNIMAN:
Nobody here has had any luck with the 8600 board.
And never heard of those instructions or ever seen a manual.
Not sure it would matter which side of the reset switch to connect to. Give it a try.

Navigation

[0] Message Index