New Life Games LLC

**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: FORDF150 on February 02, 2021, 03:32:25 PM

Title: Diagram or schematics cabinet card
Post by: FORDF150 on February 02, 2021, 03:32:25 PM

I am looking for schematics for a S2000 machine cabinet card
I am trying to figure out a backlight real circuit when I hook up the back light controller board harness going from the cabinet card to the board I need the diagrams to the cabinet card :Scratch-Head:

Title: Re: Diagram or schematics cabinet card
Post by: Stayouttadabunker on February 02, 2021, 04:05:37 PM

ford...do you mean that harness that runs from the card on the side of the MPU back to the reel backlight board?
I can give you the pin-outs of the harness if you want?

Title: Re: Diagram or schematics cabinet card
Post by: FORDF150 on February 02, 2021, 04:43:05 PM

Yes

Title: Re: Diagram or schematics cabinet card
Post by: Stayouttadabunker on February 02, 2021, 04:46:33 PM

okay...gimmie a few minutes

Title: Re: Diagram or schematics cabinet card
Post by: Stayouttadabunker on February 02, 2021, 04:53:10 PM

14-pin Molex on the MPU cabinet card > 12-pin Molex connector on backlight controller board....>>>

1>1
2>2
3>3
4 empty on both housings
5 empty on both housings
6>6
7>7
8>8
9>9
10 empty on both housings
11>11
12>12
13 empty on MPU cabinet card
14 empty on MPU cabinet card

Title: Re: Diagram or schematics cabinet card
Post by: Tilt on February 02, 2021, 05:02:36 PM

Here's the wiring diagram.

Title: Re: Diagram or schematics cabinet card
Post by: Stayouttadabunker on February 02, 2021, 05:06:13 PM

Thanks Tilt...betcha that was easier than me pulling my harness out and checking every pin for Ford?  :rotfl:
I can never find anything in them file downloads :duh: