New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Phan000 on December 07, 2023, 05:29:56 AM
-
New to me machine, came without BV.
Installed a Mei cash flow with known working head unit.
Spools up correctly. All 3 lights on, takes bill in test mode, won’t communicate with machine.
Replaced pcb, no change.
Tried replacing backplane, just in case. No change.
What else can I try to get this unit working?
-
Does it have the correct firmware (ID024) installed?
-
Not positive, but it works fine on an IGT G23.
I was thinking maybe it’s the connection at the back of the BV housing, or the harness to the backplane?
-
If it was connected via USB cable in the G23 then it was using ID028. That may be your problem.