New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Easyrider812 on December 09, 2023, 05:26:48 PM
-
Hello,
Just picked up this s2000
96438300 5x pay gold.
Giving version eprom crc error -0xF002.
Made sure all chips are seated. Bad chip? Which one would that be?
Thanks for the help
-
Bad or installed incorrectly. It's the version chip on the MPU board. It should be labeled VSXXXXXX and is installed in a socket labeled u44.
-
ThNk you
-
If it doesn't have a bent pin or something like and reseating it doesn't help contact member RB here and he can get you a replacement.
-
Machine is at my buddy’s house. Odd. Chip is not installed in the u44 location. He found the vs011gx1 chip on floor of the machine with bent and missing pins.
-
Well that mystery is solved. That chip belongs in U44, but you'll need to get a replacement since it broken pins. Contact member RB and get a new one. Install it the U44 socket paying attention to the notch on the IC and socket and you should be good to go.
-
I sent him a message
-
Great! Let us know how it goes when you get your replacement installed.
-
While we are in there. Which board is this? Can we remove the varta battery? Per some other posts I was reading, depended if it was a 500 series or an enhanced?
-
You have a 504 REV B board. Yes. Remove the VARTA and you should also remove U79. (The 8 pin chip near the VARTA.)