New Life Games LLC
Bill Validators, Currency Acceptors and Printers => JCM WBA 10, 11, 12, 13, 14, 20, 21, 22, and 23 Bill Validators => Topic started by: Fisk167 on July 24, 2016, 03:07:56 PM
-
What would be the proper Power Supply For the WBA13 being installed in a IGT S+ that has the vented DBV 200 power supply. I have seen a few listed for sale and they have different plugs. Tks
-
Check with the vendors on the home page for a power supply for a WBA 12/13 for an IGT S+.
-
Does anyone know what is the proper power supply for the IGT s+. I'm having a hard time verifying the correct one. I have a WBA13ss for IGT. I believe the power supply for the wba 10/11 is different then wba 12/13, lower amp rating on the wba 10/11. If someone has done the conversion before and can share some info would be great. I found some pics of one and I'm not sure if its correct . I will post them below
-
The wba 10/11 and 12/13 use the same power supply. The curren (amperage) issue is going from a dbv145 to a dbv200. The power supply shown on the photo you posted is the correct one for all wba validators.