New Life Games LLC
Homebrew Player Tracking and EFT Systems => NLG Homebrew Player Tracking and EFT Systems => Topic started by: FORDF150 on February 25, 2017, 09:49:38 AM
-
hello I want to know how to set up a player tracking panel for the s2000 machine
what do I need to hook one up for the master 250
-
The easiest way is to get the mastercom 250 controller, power supply, and cables
The have someone program the eeprom with a message you want displayed on the VFD in player tracking panel.
There are a few folks on here that should be able to do the programming for you.
I normally can do it but all my stuff is in storage and not easily accessible to me for now.
-
The easiest way is to get the mastercom 250 controller, power supply, and cables
The have someone program the eeprom with a message you want displayed on the VFD in player tracking panel.
There are a few folks on here that should be able to do the programming for you.
I normally can do it but all my stuff is in storage and not easily accessible to me for now.
who can do this do I have to get a chip who is the people that can do it
-
The easiest way is to get the mastercom 250 controller, power supply, and cables
The have someone program the eeprom with a message you want displayed on the VFD in player tracking panel.
There are a few folks on here that should be able to do the programming for you.
I normally can do it but all my stuff is in storage and not easily accessible to me for now.
this is what I want to set up
-
That's not a Mastercom 250
-
The easiest way is to get the mastercom 250 controller, power supply, and cables
The have someone program the eeprom with a message you want displayed on the VFD in player tracking panel.
There are a few folks on here that should be able to do the programming for you.
I normally can do it but all my stuff is in storage and not easily accessible to me for now.
how would I get this chip who are the people that can program
-
The easiest way is to get the mastercom 250 controller, power supply, and cables
The have someone program the eeprom with a message you want displayed on the VFD in player tracking panel.
There are a few folks on here that should be able to do the programming for you.
I normally can do it but all my stuff is in storage and not easily accessible to me for now.
how would I get this chip who are the people that can program
The chip is a removable EPROM on the Mastercom 250 board. If you have a Mastercom 250 then you already have the chip. What you need is a compatible player tracking panel/bracket with the appropriate cables to connect it to the Mastercom box. As soon as you do that you will see a scrolling message on the display (whatever the casino set the message to be). You only need to reprogram the chip if you want to change the message that is displayed. Once you get all the hardware you need I could reprogram the message for you if you want to do that, just PM me when you get to that point.
-
Also, the picture you posted is not of a Mastercom 250. You need equipment similar to the one in the link below, but with a tracking panel/bracket that will fit an S2000.
http://newlifegames.com/nlg/index.php?topic=14698.0 (http://newlifegames.com/nlg/index.php?topic=14698.0)
-
The easiest way is to get the mastercom 250 controller, power supply, and cables
The have someone program the eeprom with a message you want displayed on the VFD in player tracking panel.
There are a few folks on here that should be able to do the programming for you.
I normally can do it but all my stuff is in storage and not easily accessible to me for now.
how would I get this chip who are the people that can program
The chip is a removable EPROM on the Mastercom 250 board. If you have a Mastercom 250 then you already have the chip. What you need is a compatible player tracking panel/bracket with the appropriate cables to connect it to the Mastercom box. As soon as you do that you will see a scrolling message on the display (whatever the casino set the message to be). You only need to reprogram the chip if you want to change the message that is displayed. Once you get all the hardware you need I could reprogram the message for you if you want to do that, just PM me when you get to that point.
-
Also, the picture you posted is not of a Mastercom 250. You need equipment similar to the one in the link below, but with a tracking panel/bracket that will fit an S2000.
[url]http://newlifegames.com/nlg/index.php?topic=14698.0[/url] ([url]http://newlifegames.com/nlg/index.php?topic=14698.0[/url])