New Life Games LLC

**Reel Slots** Gaming Machines => Other Reel Games => Topic started by: satelliteman on May 16, 2017, 12:28:41 PM

Title: Jennings Galaxy
Post by: satelliteman on May 16, 2017, 12:28:41 PM

Looking for wiring schematic & parts list for Jennings Galaxy Super Jackpot machine.  As of now, I only have power to flourescent lighting.  I get no power from transformer other than the 110V.  Suspect transformer is bad, but where the heck do I find a replacement?  Number on transformer is V20-244.  Any help is appreciated.

Title: Re: Jennings Galaxy
Post by: Chief on May 20, 2017, 06:28:30 AM

Howdy,
    I have seen the transformer on e-bay for sale.  The numbers on the transformer are Jennings Parts numbers.
If all else fails, I would take it to a  Electronics parts store and they should be able to match it up for you. I will look to see if
I might have a schematic that will work for you.
                                              Chief
                     

Title: Re: Jennings Galaxy
Post by: satelliteman on May 20, 2017, 02:50:45 PM

Thanks for your input.  I've been looking on E-bay but haven't seen anything.

Title: Re: Jennings Galaxy
Post by: Chief on May 21, 2017, 09:53:28 AM

Howdy,
    Have not found a complete parts list yet, or schematic.... The schematic may be listed under another model name. No guarantees on luck finding it.
Hope attachments help a bit.
  Nice Machine.
           Chief

Title: Re: Jennings Galaxy
Post by: satelliteman on May 21, 2017, 10:29:54 AM

Thanks for the info.  It is appreciated.


Dennis

Title: Re: Jennings Galaxy
Post by: edtruman on October 24, 2017, 10:11:37 PM

I believe this is a Jennings Galaxy schematic

Title: Re: Jennings Galaxy
Post by: satelliteman on October 25, 2017, 05:27:20 AM

Thanks for the response, but I don't think this is going to work for me.

Title: Re: Jennings Galaxy
Post by: Ronald123 on March 28, 2020, 12:05:07 PM

Have the same slot, missing transformer. Is your transformer located behind the hopper bottom rear corner of cabinet?

Title: Re: Jennings Galaxy
Post by: satelliteman on March 28, 2020, 01:42:44 PM

Yes, as I recall, you had to pretty much dis-assemble the whole machine to get at it. But that machine is long gone. Never did find a transformer, or get it working. Sold it to some guy who just wanted it for a conversation piece in his rec room.

Title: Re: Jennings Galaxy
Post by: Ronald123 on March 28, 2020, 05:18:01 PM

Thanks.