New Life Games LLC
TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Slot Toppers => Topic started by: Thegambler327 on June 20, 2014, 12:27:11 PM
-
Got a topper today and after some modification got the base and topper mounted. Questions are as follows. I obviously got the candle hooked up. I understand that I will splice in the yellow, white, and green wires for the florescent light. When it comes to the leds is where my problem is. I have red and black and from what I read on the old site is black is top row pin 3 and red would be bottom row pin 2? Next am I missing a harness for the led?
-
This is for a bb1. Also if someone could just pop the led cover off and post a picture so I can see if I'm missing a harness. Thank you in advance
-
Here are the pictures for the LED power.
-
Thanks again!
-
Ok back at this yet again. Last time I hooked it up I popped a resistor. Got a new harness today so what wires go where?