New Life Games LLC

TITO - Ticket in Ticket Out, Slot Toppers, Stands and Add-on Accessories => Bettor Slots TITO - Ticket in Ticket Out => Topic started by: sakwilla on December 24, 2019, 09:33:36 PM

Title: Tito Stalling Issue: G23
Post by: sakwilla on December 24, 2019, 09:33:36 PM: I have read a few posts about issues with the G23 stalling when you click cash out and reverts to handpay. Like most people it sometimes works and sometimes doesnt.

I can see people believe its issues with the power becoming idle to the tito thus causing the issue, but no one has pointed out a solution

Has anyone had success with fixing this issue as it is annoying.

Thanks in advance :)
Title: Re: Tito Stalling Issue: G23
Post by: Stayouttadabunker on December 24, 2019, 10:18:16 PM: Hmm...What printer is installed doing this? :scratch-head_3:
There's a few models...
Title: Re: Tito Stalling Issue: G23
Post by: bpracer on December 25, 2019, 06:07:10 AM: Quote from: sakwilla on December 24, 2019, 09:33:36 PM
I have read a few posts about issues with the G23 stalling when you click cash out and reverts to handpay. Like most people it sometimes works and sometimes doesnt.

I can see people believe its issues with the power becoming idle to the tito thus causing the issue, but no one has pointed out a solution

Has anyone had success with fixing this issue as it is annoying.

Thanks in advance :)

I have tried the following:

Moved the TITO outside of the machine and supplied an external power source.

I have tried multiple TITO boards/multiple cables.

I have tried different daughter cards on a G-20 and SMLD.

I have tried using the different comm ports.

I also tried installing different versions of OS but no luck.

I still have the same issues, I guess I will need to dig a little deeper.

It goes to a hand pay about 20% of the time and it seems very random. After a hand pay you can immediately hit the button for free credit play and get credits, you can also cash out and it works, all without having to reset anything.
Title: Re: Tito Stalling Issue: G23
Post by: rickhunter on December 26, 2019, 01:48:55 PM: I have the same issue, all 4 G23 machines I have worked on did it, as well as 6 G20â€™s. The behavior is exactly as described above. I have not been able to fix it.
Title: Re: Tito Stalling Issue: G23
Post by: sakwilla on April 11, 2023, 05:04:50 AM: Has anyone had any luck getting the Better Titos to work consistenly on the G23s - ive done most of these things and it resorts to handpay 50% of the time. So annoying.
Title: Re: Tito Stalling Issue: G23
Post by: a69mopar on April 11, 2023, 06:51:05 AM: Usb or serial printer? Does it accept tickets 100% or 50%?