New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: 61Wally on November 13, 2021, 03:14:35 AM
-
I had the wrong chips in this machine and was missing denomination display parts. I was able to obtain them so graciously from Mr. RB. I’m ready to install the components, and was wondering if I start from the beginning as far as programming the machine? I’m going to be adding a TITO as well. Any suggestions?
-
You should have a TITO programming sheet to follow right?
Follow that sheet.
If you don't have it, do a search on NLG for it.
Clear chip first, then Key31 or Key45 to get into programming - you didn't say what MPU you have.
Here's a link on setting up a TITO board...>>>
http://newlifegames.com/nlg/index.php?topic=319.0 (http://newlifegames.com/nlg/index.php?topic=319.0)
-
Ok Great, I just did the key chip part with my split pay. Now I will go through the TITO PAGES that were sent to me with my TITO boards. I get confused on the order of programming sometimes. I can’t even understand my own notes !!!
-
GREAT DAY. After obtaining the correct, missing components and programming procedures from MR. RB, My machine is up and running perfectly. Thanks again for all. TAKE CARE.