New Life Games LLC

Bill Validators, Currency Acceptors and Printers => MEI Mars Bill Validators => Topic started by: buybestslots on February 28, 2015, 01:37:38 PM

Title: mei to s2000
Post by: buybestslots on February 28, 2015, 01:37:38 PM

have a mars we pulled from a junk s2000 along time ago, we put it in another s2000 but can't get it to go to green light
any hints ?
do those 3 wires with  just lugs go any where?
thanks
steve

Title: Re: mei to s2000
Post by: rickhunter on February 28, 2015, 11:05:51 PM

I just installed a mars into an I-game.  I only plugged the 3 black molex connectors 5, 4 and 2 pins.  The 3 wires, I just left hanging.  Are the 3 lights on when you power up?  When the game is not configured for a validator, the 3 lights just stay on.  Then when the game detects the validator, the green light starts blinking.  When it is ready to accept, the green light is lit.  What does your validator do?

Title: Re: mei to s2000
Post by: buybestslots on March 01, 2015, 05:57:50 AM

I get 3 lights at 1st and it cycles  but then goes to yellow light only I'll try unhooking the front dbv  bezel, maybe a mars aren't for that type with all those light

Title: Re: mei to s2000
Post by: idylewild1 on March 01, 2015, 06:49:04 AM

I would think you would may have to do a netplex configure.

Title: Re: mei to s2000
Post by: buybestslots on March 01, 2015, 07:00:28 AM

I tried that  ,  going to try another cash box also ,pulled out a uba out of this game  hate to give a uba up when we have wba,s and  a few mars laying around
was  cash can  replaced and  everything is good