New Life Games LLC
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length

News:

Welcome to the NewLifeGames.com message forum! 

 


NLG Site Navigation Menu


Archives of old posts can be found at...... Newlifegames.net/nlg/

Author Topic: SNK Games (Neo Geo MVS/AES)  (Read 151352 times)

0 Members and 1 Guest are viewing this topic.

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
SNK Games (Neo Geo MVS/AES)
« on: May 23, 2014, 08:40:08 PM »
Fixed: AES JAMMA system
Symptom: Would only play the supplied Puzzle De Pon cartridge.

This was a strangely modified home game system. It had a custom BIOS chip and an added on chip that was used to add in a test switch and game credits. It also had an external audio amplifier board and a JAMMA edge connector/wires soldered in to allow it to be played in an arcade.

Pulled the added-on 74LS245 IC, wiring, test switch, and custom BIOS chip. Erased and reprogrammed the custom BIOS chip with UniBIOS code. Resoldered cracked solder joints on the external audio amplifier. System will no longer take quarters or have an arcade style test switch with coin reporting, etc., but will now play all AES games as requested by the owner.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #1 on: May 23, 2014, 08:40:24 PM »
Subject: Troubleshooting vertical lines on the MV6 6-slot system

Do you have vertical lines on the screen either on the moving foreground objects or background objects on your 6 slot board?

On the 6 slot board there are a bunch of 74LS251 8 to 1 data selector ICs. The ICs nearest slot 6 are for the foreground objects and the ICs nearest slot 1 are for the background objects.

The easiest way to check these chips for the bad one is to put a test cart in slot 5 and flip DIP switch 8 to pause the screen where you can see the problem images on screen.

Next take the logic probe and check pin 15 of each 74LS251. Look for the IC with no signals on that pin. If you find one without a signal then check the trace between the slot and that pin.

Not fixed? Next check pin 4 of each 74LS251 for data output. If one is missing then replace the IC.

Still not fixed? Next take the logic probe and put it on pin 15 of each 74LS251. Slide the tip over to where it momentarily shorts between pin 15 and 16. Look at the screen for lines. See lines pop up? That's not the chip you are looking for. Finally find one that doesn't pop up any extra lines when you short it across? OK. That's the data line that is the problem. Follow pin 4 of that chip and find where it connects to go to the bottom board.

Can't find where it goes to the connector? Check a neighboring 74LS251 IC and see where it goes. If you can find it then check for a bad trace between the suspect data line on pin 4 and the connector to the bottom board and patch it.

Still not it? Check the connection between the top and bottom board. If there is no signal then desolder the connector, disassemble it, pull out the offending connector piece, clean it, reassemble, and resolder it back in place. Test it.

Still no? Follow that trace to the chip it goes to and if the trace is good then replace the chip.

If that doesn't do it then call a priest and have the board exorcised.

Enjoy!
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #2 on: May 23, 2014, 08:40:40 PM »
Model: MVS MV-4 (4 slot)
Symptom: Missing background graphics

There's a 74LS138 on the top board. It's a 3 to 8 decoder. It's used to enable the slot wanted. Not part of the repair, but just wanted to doc it on the forum. Also, there are a LOT of 74LS244 buffers & 74LS245 latches on the board. Each one is hooked together with the neighboring chip that is doing the same function on each of the different slots. In other words, each cartridge slot has multiple buffers and latches. Each latch for specific connections (program data lines 0-8, for example) on the cartridge slot has their board side connections (not cartridge side connections) tied together to the connectors that take the signal to the bottom board.

Now, on to the repair:

Test Cart used: Shock Troopers, 2nd Squad.

This top board had a totally white screen with the exception of the "insert coin" words in the center and the "credit 0" at the bottom right and even that text was mispelled...

Used a logic probe to check each and every chip for input and output logic levels. Found a 74LS244 next to slot 4 that had incorrect levels for input vs. output. In tracing the pins on the chips I discovered that there is a chip doing the same thing for each of the slots and they are all tied together. That makes 4 video ROM buffers - one for each slot - all tied together when the connect to the bottom board.

Why does it matter that they are tied together? Well, when one shorts it tends to draw excessive current through the others and takes them out too.

Replaced the 74LS244 chips at locations N4, J4, E4, and A4 to fix.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #3 on: May 23, 2014, 08:40:53 PM »
Model: MVS MV-4
Symptom: Cartridges do not work. Crosshatch pattern is all you get on the screen, no matter what slot. Unusual in that the problem follows the top board when swapping boards out.

Resolution: There is a 74F138, 3 to 8 decoder, at position A2 that determines which slot is active. Fixed broken trace on one of the 3 enable lines to allow the system to switch the slots and access the cartridges.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #4 on: May 23, 2014, 08:41:16 PM »
Model: MVS MV-4
Symptom: Vertical lines in the graphics on slot 3.

Resolution: The graphics ROMs connect to the system board through a series of 74F253 ICs. These are dual 1 of 4 line selectors. Pin 21B on the bottom cartridge slot connector's data wasn't seen on the output (pin 9) of the 74F253 at position D1. Patched the trace to fix.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #5 on: May 23, 2014, 08:41:24 PM »
Model: MVS MV-6
Symptom: Stuck in Watchdog (a.k.a. Click of Death)

6 slot board would constantly reset... Logic probe on pin 18 of the CPU confirmed that the reset line kept bouncing. This was the watchdog circuit trying to kickstart the CPU into booting.

Checked the data lines and enable lines on the work RAM - checked fine.

Checked the enable lines on the backup RAM and discovered that the WE* line on one of the RAMs was missing its signal and the OE* line on both RAM chips was missing its signal.

Repaired the bad traces to fix the bottom board.

It appears that something corroded the plate-thrus on the board. Seems to be a common occurrence on all models of the MVS boards.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #6 on: May 23, 2014, 08:42:05 PM »
Model: MVS MV-6
Symptom: Graphics corruption

Found and repaird 4 gouged traces on the top board. Traces were damaged due to insufficient padding when item was shipped. The top cover was bent and the traces were gouged by it.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #7 on: May 23, 2014, 08:42:22 PM »
Board: MVS MV-4
Symptom: Crosshatch of death

Crosshatch of death is where the board shows the self test crosshatch screen. It is not recognizing any cartridges inserted into the board.

This is a common problem on the older, larger 4 slot board. The NiCD backup battery will leak and eat through traces that run under and next to it. Trace the lines with a multimeter from the connector next to the battery and run jumpers to patch any bad traces.

That connector is what the system uses to access the program ROMs on the cartridges. If it can't read and run the program then it cannot detect and use the cartridges. ;)
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #8 on: May 23, 2014, 08:43:16 PM »
Model: MVS MV-4F (newer, smaller 4 slot)

Wow. This one was a bitch. Typical crosshatch problem, but the battery was not leaking and no traces were damaged near it. (Although the battery isn't in the same proximity to the traces on this board like on the older 4 slot board. Thus, this board doesn't suffer from the same Crosshatch of Death problem)

I spent a lot of time troubleshooting and pinning out the SMT chips on the top board before moving down to the bottom board.

The top board has the NEO-G0, NEO-244, and NEO-253 chips on it.

It appears from the troubleshooting that the NEO-G0 chip is made up of 4 74LS245 chips. I haven't pinned out the 244 or the 253 chips but assume that they are similar (4 x 74LS244 and ? x 74LS253 chips)

Enjoy the pinouts:
Code: [Select]
NEO-G0 chip at location D1

1 - d3 to cart 4
2 - d0 - cn10-4a
3 - d1 - cn10-5a
4 - d2 - cn10-6a
5 - d3 - cn10-7a
6 - d0 to cart 3
7 - d1 to cart 3
8 - d2 to cart 3
9 - d3 to cart 3
10 - gnd
11 - d4 to cart 3
12 - d5 to cart 3
13 - d6 to cart 3
14 - d7 to cart 3
15 - d4 - cn10-8a
16 - d5 - cn10-9a
17 - d6 - cn10-10a
18 - d7 - cn10-11a
19 - N/C?
20 - N/C?
21 - d4 to cart 4
22 - d5 to cart 4
23 - d6 to cart 4
24 - d7 to cart 4
25 - gnd
26 - vcc
27 - d8 to cart 3
28 - d9 to cart 3
29 - d10 to cart 3
30 - d11 to cart 3
31 - d8 - cn10-12a
32 - d9 - cn10-13a
33 - d10 - cn10-14a
34 - d11 - cn10-15a
35 - d8 to cart 4
36 - d9 to cart 4
37 - d10 to cart 4
38 - d11 to cart 4
39 - Connects to E1-39 & CN9-14
40 - Connects to 52 & to B1 52/40
41 - N/C?
42 - gnd
43 - d12 to cart 3
44 - d13 to cart 3
45 - d14 to cart 3
46 - d15 to cart 3
47 - d12 - cn10-16a
48 - d13 - cn10-17a
49 - d14 - cn10-18a
50 - d15 - cn10-19a
51 - CN9 - 13b & E1-51
52 - Connects to 40 & to B1 52/40
53 - d12 to cart 4
54 - d13 to cart 4
55 - d14 to cart 4
56 - d15 to cart 4
57 - gnd
58 - vcc
59 - N/C?
60 - gnd
61 - gnd
62 - d0 to cart 4
63 - d1 to cart 4
64 - d2 to cart 4

--------------

NEO-G0 chip at location B1

1 - d3 to cart 2
2 - d0 - cn10-4a
3 - d1 - cn10-5a
4 - d2 - cn10-6a
5 - d3 - cn10-7a
6 - d0 to cart 1
7 - d1 to cart 1
8 - d2 to cart 1
9 - d3 to cart 1
10 - gnd
11 - d4 to cart 1
12 - d5 to cart 1
13 - d6 to cart 1
14 - d7 to cart 1
15 - d4 - cn10-8a
16 - d5 - cn10-9a
17 - d6 - cn10-10a
18 - d7 - cn10-11a
19 - N/C?
20 - N/C?
21 - d4 to cart 2
22 - d5 to cart 2
23 - d6 to cart 2
24 - d7 to cart 2
25 - gnd
26 - vcc
27 - d8 to cart 1
28 - d9 to cart 1
29 - d10 to cart 1
30 - d11 to cart 1
31 - d8 - cn10-12a
32 - d9 - cn10-13a
33 - d10 - cn10-14a
34 - d11 - cn10-15a
35 - d8 to cart 2
36 - d9 to cart 2
37 - d10 to cart 2
38 - d11 to cart 2
39 - Connects to C1-39 & CN9-13
40 - Connects to 52 & to D1 52/40
41 - N/C?
42 - gnd
43 - d12 to cart 1
44 - d13 to cart 1
45 - d14 to cart 1
46 - d15 to cart 1
47 - d12 - cn10-16a
48 - d13 - cn10-17a
49 - d14 - cn10-18a
50 - d15 - cn10-19a
51 - CN9 - 12b & C1-51
52 - Connects to 40 & to D1 52/40
53 - d12 to cart 2
54 - d13 to cart 2
55 - d14 to cart 2
56 - d15 to cart 2
57 - gnd
58 - vcc
59 - N/C?
60 - gnd
61 - gnd
62 - d0 to cart 2
63 - d1 to cart 2
64 - d2 to cart 2

OK...

After all of that I moved to the bottom board and checked the interface chips that connect the bottom board to the top board. WOW There were a lot of missing and incorrect signals coming from those chips. My logic probe got a workout on this system.

Replaced the following bad chips to fix it:

74LS245 @ N1
74AS245 @ M4
74F245 @ N9
74F245 @ L9
74AS245 @ F11
74AS245 @ D11
74AS245 @ C11

I'm thinking that someone MUST have disconnected the two boards with the system powered up. That's the only thing I could think of that would've taken out all those chips at once.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #9 on: May 23, 2014, 08:44:26 PM »
Model: MVS MV-2
Symptom: Multiple - Video RAM Error $8000 and Calendar Error

Had an MVS 2 slot sent to me for repair that had a couple of issues. The first was the typical Video SRAM issue at $8000 - The CXK5814 chips were both bad.

The second issue was the game was stuck at the green screen. It would boot to the Backup RAM test if you turned all the DIPs on and would work fine with a UniBIOS chip. It was a Calendar Error problem. This problem does not always show up as the text "Calendar Error" on the screen. It may manifest itself as a "stuck on green screen" problem.

Armed with my trusty logic probe the calendar IC (D4990) checked like this:

Code: [Select]
Pin 1 - H
Pin 2 - H
Pin 3 - H
Pin 4 - L
Pin 5 - H
Pin 6 - L
Pin 7 - L

Pin 8 - L
Pin 9 - L
Pin 10 - H
Pin 11 - H
Pin 12 - Nothing
Pin 13 - H
Pin 14 - H

Hmmm... Crystal looks to be defective.

Grabbed a working board and the signals look like this:

Code: [Select]
Pin 1 - H
Pin 2 - H
Pin 3 - H
Pin 4 - L
Pin 5 - H
Pin 6 - L
Pin 7 - L

Pin 8 - L
Pin 9 - L
Pin 10 - Pulsing H/L
Pin 11 - H
Pin 12 - H
Pin 13 - H
Pin 14 - H

OK - Really looks like a bad crystal now. Swapped one off a parts board and POOF. System is now working.

Hope the logic readings help you troubleshoot your system if you ever need it.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #10 on: May 23, 2014, 08:44:38 PM »
Model: MVS MV-4
Symptom: Stuck in Watchdog (Click of Death)

Board gave garbage on the screen with constant clicking sound. In other words, it was dead and the watchdog circuit was resetting the CPU.

Replaced a shorted 74AS245 at location B7. It was shorted internally and was getting red hot. Board powered up with a Video RAM error at 8000. Replaced the lower bank IC at L11 to finish repairing the board.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #11 on: May 23, 2014, 08:44:48 PM »
Model: MVS MV-2
Symptom: Will not boot. Resets.

This one is a 2 slot that was shipped to me with the description of "stuck on green screen with garbage"

When it arrived I hooked it up and it would get to the green screen as normal but would then reboot. This cycle repeated indefinitely. Battery had leaked and there was corrosion on some of the board traces. It was not a Calendar Error issue as it rebooted. Calendar error would've manifested itself by freezing on the green screen and not rebooting.

Pin 20 of the backup RAM was missing its signal. Removed the battery, cleaned the board, replaced the corroded 74HC32 at location J2, and patched a corroded trace between J2 Pin 2 and transistor C1815 to fix. Replaced the battery with a new one and tested the board.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #12 on: May 23, 2014, 08:45:13 PM »
Model: MVS MV-4
Symptom: Garbage on screen / Click of Death (Stuck in Watchdog)

This one had some physical damage that someone did a half-ass repair on. It's ugly as sin but the trace they patched is working.

The board would display nothing but garbage and would constantly do a click click click - watchdog circuit was trying to restart the system.

Replaced 2 74LS245 ICs at locations B7 and B8. Both were shorted and getting very hot.

Board was still in watchdog restart.

Patched a bad trace on data line D16 between the upper Backup RAM and the upper Data RAM. Now the board would constantly go through self test and restart with garbage on the screen. It was a different restart than with the watchdog circuit.

Examined the board under a magnifying glass and found one more gouged trace the previous tech missed between data line D1 on the CPU and pin 60 on the PRO-C0 chip. Patched the trace and the board is now running fine.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #13 on: May 23, 2014, 08:45:23 PM »
Model: MVS MV-2
Symptom: Vertical bars through graphics

This 2 slot had some bad battery damage and vertical bars through the Neo Geo logo and certain sprites.

Checked the ROM Data Lines on the cart slot pins A19/B19 through A26/B26 with the logic probe. Cart was working fine. Followed the traces to the NEO-257 IC at J2 with the logic probe. Traces were good. Followed the outputs of the NEO-257 IC to the NEO-ZMC2 IC. Two of the data lines (D0 and D1) were missing from the NEO-257.

Replaced the surface mount NEO-257 IC at J2 with one pulled from a parts board to fix.

Cleaned the board & replaced the battery as well.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #14 on: May 23, 2014, 08:45:32 PM »
Model: MVS MV-2
Symptom: Random Backup RAM errors

The control signals were missing from the Backup RAM chips. Installed a UniBIOS to further check the board and it would constantly crash. A close inspection of the board revealed corrosion damage from either liquid or rodents. Cleaned the board and found that the trace for address line A13 was damaged coming off of the CPU. Patched the trace and tested the board.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #15 on: May 23, 2014, 08:45:41 PM »
Troubleshooting with the UniBIOS chip

The UniBIOS chip can be used to bypass Backup RAM, Calendar Error, and other problems to allow for a board to be further tested. If the system bypasses errors and runs then odds are it will be an easier repair.

If it's crashing then there are other problems that are masked by the error message. Check the BIOS socket, look for gouged traces, and check for corroded plated thru holes.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #16 on: May 23, 2014, 08:45:49 PM »
Model: MVS MV-2
Symptom: Backup RAM error

Board was giving a Backup RAM error (written 5555 read 5500.)

The "00" typically means the chip is missing control signals.

Checked the board and it had 2 bad traces going to the control lines of the 2nd Backup RAM IC. Patched the traces and tested the board.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #17 on: May 23, 2014, 08:46:03 PM »
Model: MVS MV-4
Symptom: Corrupted Graphics

The Neo Geo logo screen had the words broken into jumbled blocks and there were "0" (zeros) down the left and right sides of the screen.

Checked the board for broken traces. Did not find any. Swapped the top board with my test board. Same problem - it's on the bottom board. Replaced the 2 74LS244 buffer chips that were driving the address lines for the graphics ROMs. No change.

This was still an address line problem since the problems were in blocks and not in vertical lines on the screen.

Took the logic probe and checked each address line at the top board. Noticed one of the lines only had a slow pulse on it instead of activity. Shorted it to the next address line over and the zeros went away and there was just garbled graphics. Traced that line back and found where there was a very small area of board between connector CN8 and the edge of the board that had taken a hit.

Patched the broken trace to fix the board.
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #18 on: May 23, 2014, 08:46:32 PM »
Here's a pinout for the custom NEO-ZMC2 chip

The NEO-ZMC2 IC is documented incorrectly on a few websites. It does NOT multiplex sound data. Instead it takes the foreground and background graphics (16 bits each for a total of 32 bits) and interfaces with a single 8 bit (8 traces) connection to the Neo graphics subsystem.

On the older 2 slot the ZMC2 pins GAD0 through GAD3 and GBD0 through GBD3 connect to the NEO-C0 IC to get this multiplexed graphics data into the video subsystem.

Standard conventions apply - Vcc = +5v, Gnd = ground, a "*" means active low (when there's a bar over top of the pin's function), etc...

RJ

Code: [Select]
NEO-ZMC2
1 - GAD2
2 - GND
3 - GAD3
4 - DOTA
5 - LOAD
6 - EVEN
7 - H
8 - DOTB
9- NC
10- GBD0
11- GBD1
12- Gnd
13- GBD2
14- GBD3
15- C1
16- C1
17- C2
18- C3
19 - C4
20 - C5
21 - C6
22 - C7
23 - Gnd
24 - C8
25 - C9
26 - C10
27 - C11
28 - C12
29 - C13
30 - C14
31 - C15
32 - C16
33 - Vcc
34 - C17
35 - C18
36 - C19
37 - C20
38 - C21
39 - C22
40 - C23
41 - C24
42 - Gnd
43 - C25
44 - C26
45 - C27
46 - C28
47 - C29
48 - C30
49 - C31
50 - 12M
51 - NC
52 - Gnd
53 - MA11
54 - MA12
55 - MA13
56 - MA14
57 - MA15
58 - MA16
59 - MA17
60 - MA18
61 - MA19
62 - MA20
63 - Gnd
64 - MA21
65 - A8
66 - A9
67 - A10
68 - A11
69 - A12
70 - A13
71 - A14
72 - A15
73 - Vcc
74 - A0
75 - A1
76 - SORD0 (Can't quite make out the writing)
77 - CS*
78 - CSDOT*
79 - GAD0
80 - GAD1
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

Offline channelmaniac

  • Surface mount soldering geek
  • Global NLG Site Moderator
  • NLG Member 501 to 10,000 Posts
  • *
  • Posts: 2507
  • Reputation Power: 179
  • channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!channelmaniac Is an-NLG GOD!
  • Few things are better than fixing an old game...
    • Arcadecomponents.com - Looking for hard to find chips?
Re: SNK Games (Neo Geo MVS/AES)
« Reply #19 on: May 23, 2014, 08:47:28 PM »
From Kyuusaku on the Neo-Geo.com forums:

Here's the ZMC2's early counterpart at least for home carts:

ALPHA-8921 / PRO-CT0

Code: [Select]
D1 odd.15 1 64 VCC
D3 odd.19 2 63 VCC
D5 odd.24 3 62 odd.26 D6
D7 odd.28 4 61 odd.22 D4
D8 odd.14 5 60 odd.17 D2
D10 odd.18 6 59 odd.13 D0
D12 odd.23 7 58 A8
D14 odd.27 8 57 A7 inputs?
D9 odd.16 9 56 A5
D11 odd.20 10 55 A9
D13 odd.25 11 54 test?
D15 odd.29 12 53 test?
D0 even.13 13 52 test?
D2 even.17 14 51 test?
D4 even.22 15 50 gnd
D6 even.26 16 49 gnd
D1 even.15 17 48 B39
D3 even.19 18 47 B38
D5 even.24 19 46 B37 mux outputs?
D7 even.28 20 45 B36
D8 even.14 21 44 gnd
D10 even.18 22 43 gnd
D12 even.23 23 42 B35
D14 even.27 24 41 B34
D9 even.16 25 40 B33 mux outputs?
D11 even.20 26 39 B32
D13 even.25 27 38 test?
D15 even.29 28 37 test?
B30 29 36 test?
select inputs? B31 30 35 test?
GND 31 34 test?
GND 32 33 test?

Notes:
test? = NC pins or pins with tracks that ONLY lead off the board for testing.
A## are not address lines but home cart pin numbers as are B##

Don't mind the bad formatting
I have too many hobbies! Electronics, gunsmithing, Miatas, arcade games, metal detecting, etc...

http://www.arcadecomponents.com

 

Cell Phone and Pad Mode

imode wap wap2

NLG Archives

Archives @ newlifegames.net Wayback Machine

Contact Us

NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442
If you find this site helpful, please consider becoming a Contributing NLG Member with a monthly subscription to help cover the cost of pizza, coffee, aspirin, hosting, and bandwidth.
Contributing Members: get unlimited personal messages, can save topics and replies as drafts,
can post to the Classified ads, get unlimited access to the downloads, and also get this minty badge:



**Subscription Link** (Click Here) **Subscription Link**



           
If you would rather remain anonymous Thank You or just want to help support the site, please use this "make a donation" button:




From your entire NLG staff, thank you for supporting NLG.


New Life Games LLC 1788 HIGHWAY 95 UNIT 30 BULLHEAD CITY AZ 86442




Newlifegames.com     Newlifegames.net     Newlifegames.org

Newlifegame.com     Newlifegame.net     Newlifegame.org    Newlifegames.us

   New Life Games     NewLifeGames  NLG

 We Bring new Life to old Games    1-888-NLG-SLOTS

Are all Copyright and Trademarks of New Life Games LLC 1992 - 2022


FAIR USE NOTICE:



This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml
If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.




The NewLifeGames.com website is optimized for use with Firefox and a minimum screen resolution of 1600 x 900 pixels.

SimplePortal 2.3.5 © 2008-2012, SimplePortal