**Video Poker, Keno, Slots, 21** Gaming machines > IGT AVP (Including G20,G23)

Information on G23 Edge lit Dynamic Buttons

<< < (2/9) > >>

Stayouttadabunker:
https://www.youtube.com/watch?v=YxRmLzAzOnE


Above is a youtube video link of somebody at GET-T taking one apart :nerd:....I haven't watched it yet to see what they do. :sherlock:


ugh...I just watched it....they don't show if you can replace the OLED display screen or not.  :banghead:

Stayouttadabunker:

--- Quote from: RodneyK on March 03, 2022, 07:42:07 AM ---It is a small screen connected to a PCB. They can be unbound but then finding a replacement screen isn’t the easiest thing either.

--- End quote ---

Have you tried looking for the small OLED screens here?...>>>

https://www.usmicroproducts.com/product/USMP-P22403

TopDogElec:
I watched it yes, he makes it look so easy but I’m sure he’s done it a million times. Not as easy as it looks, the tab to remove the lens is a PITA and I gave up because I didn’t want to destroy the plastic housing. I got a great deal on them from Get-t though, the refurbished ones. They have them for $42

Stayouttadabunker:
Well, usmicro sells single screens for about $28 bucks each but the only way to know for sure is take a button apart and see if the screen has a short ribbon cable with a non-soldered end.
If the ribbon cable is soldered, or the display panel is "embedded" to the circuit board, then it's a much more complicated job.
I just hope your refurbished $42 dollar buttons last a while.  :yes:

idesign:
The screens are soldered in

Navigation

[0] Message Index

[#] Next page

[*] Previous page