Bill Validators, Currency Acceptors and Printers > Printers - ALL

WMS BB2/Changing Printer (Ithica 950) NETPLEX? (Can I Switch End Circut Boards)?

(1/3) > >>

Dirty Slots:
Hi, Would I be able to switch the rear circut boards on these 2? My machine only has the old style cord.

Is the new board different so I can add TITO? Should I just buy a new printer harness plug?

Also would this be "NETPLEX" when I'm setting up my clear/reset?

Thank you!

ITHICA 950

idesign:
Unless the firmware is for WMS in the new printer it won't be compatible.  Suggest you print setrup tickets on each and compare, plus the new printer is USB so can not be used on a BB2.

Dirty Slots:
ok, how would I run a test ticket?

idesign:
Hold that button down while powering it up with a ticket in it

Dirty Slots:
It's an Ithica 950. Would I choose Ithica 850 in the choices? or Netplex? When I clear the machnine and set up a new game.

Also, the printer (old one) doesn't feed tickets when I hit the feed button. Should it feed as long as it has power?

Thanks

Navigation

[0] Message Index

[#] Next page