Bill Validators, Currency Acceptors and Printers > Printers - ALL

Epic 950 Printer

(1/2) > >>

Michael33881:
Epic 950 printer front rollers not activating.

Before I order parts I just want to run the situation by the group.

Put ticket in to feed and the rollers activate to take the ticket but the front rollers do not activate causing a fault light.   I took everything apart and cleaned the sensors and I flipped the motor connections to see if maybe the motor stopped working for the front that kicks out the ticket.   Tested and when I put a ticket into the feed the front motor activated so motor is good.

After I took everything apart and cleaned it and tested it worked great a few times but stopped working again.   Would this be a possible failed burst sensor or is the board going bad?   Before it stopped working all together when printing a ticket it was hard to pull out the ticket like it didn't roll it out all the way so I am thinking sensor.

Thanks!

Stayouttadabunker:
Those are out for sale pretty cheap here and there.
Probably because they're way past their lifetime expectancy.
I'd pick up another one for parts and swap stuff.
Here's a pdf sheet on it...>>>

Michael33881:

--- Quote from: Stayouttadabunker on January 26, 2024, 06:57:25 AM ---Those are out for sale pretty cheap here and there.
Probably because they're way past their lifetime expectancy.
I'd pick up another one for parts and swap stuff.
Here's a pdf sheet on it...>>>

--- End quote ---

Ever see that movie Money Pit?  That is how I feel with this machine I bought.  Was hoping it would be a 13.00 sensor vs a 60-100.00 printer.   PS the fans came that you recommended and the machine is nice and quiet and no longer sounds like a jet plane. 

Stayouttadabunker:
Just have to be a bit smarter and more knowledgeable when buying used machines.  :cool_thumb_up:
You're that guy that walked into the used car parking lot, and the greaseball salesman was just seeing dollar   :money: :money: signs when you asked him  :drool04:   about the machine.
He knew the tranny was mis-shifting, you didn't....don't be THAT guy!  :rotfl:

Michael33881:

--- Quote from: Stayouttadabunker on January 26, 2024, 07:19:01 AM ---Just have to be a bit smarter when buying used machines.  :cool_thumb_up:
You're that guy that walked into the used car parking lot, and the greaseball saleman was just seeing money signs when you asked him about the machine.
He knew the tranny was mis-shifting, you didn't....don't be THAT guy!  :rotfl:

--- End quote ---

He talked a great game on how they "clean" every machine and test everything to make sure it is in fully operational condition.   Well it was until it got home and used for a few days and you start to see things they didn't do.    Here is a great example.  The Oled panel worked but 3 days later all the screen went black.  He said this machine came with a warranty if anything should go wrong.  I reached out and sent photos and his response was do you turn this machine on and off?  I replied and said yes because I do not want to hear the jet plane running all night long.  He told me that turning it on and off caused the Oled to stop working and that isn't covered.  I told him about the missing fan from the CPU and sent photos and I sent photos of the clogged fans and the one that was frozen.  He didn't like that I called him out on the work and now blocked.   OH WELL

Navigation

[0] Message Index

[#] Next page