Bill Validators, Currency Acceptors and Printers > Printers - ALL

Paycheck 3 (Nanoptix) on Bally Alpha

(1/1)

aldorinc:
Hey All!

Thanks to all of the information on this site, my Bally Alpha (S9000) is up and running! The last piece to fix is the printer. It came with a PayCheck 3 from Nanoptix installed. The printer turns on and will print a test voucher (see attached photos), but after hours of scouring the internet I'm unable to find anything on using this with a Bally Alpha.

I've tried setting up under "Seiko PSA-66t", as well as "Ithica 850". There are 4EA dip switches on the printer as well, and I've tried a few different Bally ones but no success yet. After hitting set, there is no response from the printer from hitting "print test voucher" and I get a "voucher printer com error" message.

Worst case I can buy a Gen2 to get it printing, but wanted to see if anybody had used one of these and if a certain combination of settings would work.
 :thank_you:
Thanks for the help!

Navigation

[0] Message Index