Coin Comparitors and Other Coin acceptors > Coin Comparitors and Other Coin acceptors
What voltage and model comparitor for my Bally S5500?
Midcoastsurf:
I can't seem to find this info in the manual or near where the comparitor should be. I'm looking for a nickel comparitor, I just don't know what model and voltage I need to get.
Is it best to measure the plug that goes into the comparitor to see what voltage it's throwing out?
Thanks!
Sunrise Side:
Mine has a CC16-D which I believe is a multi voltage. It has the Grey wires going to the magnetic coil on the back side.
RB:
Here is a pdf I saved from the old site. I'm sure it may have omissions, possibly even mistakes but it might help point you in the right direction if you figure out the voltage. I am not "Bally Smart". Most of my experience has been with IGT machines. Good luck.
buybestslots:
24 volts dc grey wires
Midcoastsurf:
Here are pics. There is one gray wire with a stripe.
Navigation
[0] Message Index
[#] Next page
Cell Phone and Pad Mode imode wap wap2 |
NLG Archives Archives @ newlifegames.net Wayback Machine |
Contact Us NLG Shop 928 754-4147 Email Us 1788 Highway 95 30 BHC City AZ 86442 |