Coin Comparitors and Other Coin acceptors > Coin Comparitors and Other Coin acceptors

CC-40 Comparator

<< < (3/3)

rokgpsman:

--- Quote from: Mr. Dinoman on October 30, 2015, 08:24:49 AM ---Here is some info I have on the CC-40...Hope this helps...
> The Coin Comparitors are as follows:
 > CC-40 Coin Mechanisms 12VDC (Used). There is a 6 plug module. The color
 > wires from the harness are as follows:
 > 1 - Gray = "TILT"
 > 2 - Purple = "10ma DC SOURCE"
 > 3 - Red = "CREDIT" - Pulls LOW when coin accepted, the LED goes out
 > momentarily, 100ma max.
 > 4 - Empty = "24VAC or 24VDC"
 > 5 - Orange = "12VAC" (Note 12VDC units use this pin)
 > 6 - Black = "Ground"
 
 

--- End quote ---


What if it is the 50 (48) volt AC version of a CC-40? They made them in several voltage versions according to the manufacturers website:

http://www.coinmech.com/product_profile.cfm?id=11

"CC-40 product offered in voltages ranging from 12 volts DC to 48 volts AC"

Mr. Dinoman:
they only show 1 document dated 1986 (as shown in the photo)...It was a 24vac version...Would need to see a photo of the actual inside PC board to compare...

Navigation

[0] Message Index

[*] Previous page