New Life Games LLC

Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: Jurchip on April 29, 2022, 01:57:04 AM

Title: MIKOHN SUPER CONTROLLER CON2 and IGT PE+ (prog doesn't back to starting amount)
Post by: Jurchip on April 29, 2022, 01:57:04 AM

Hello,

I have MIKOHN SUPER CONTROLLER CON2 connected on my IGT Poker Pe+

I have a little problem.

When Progressive is winned on a machine, after reset jackpot,  Progressive amount doesn't back to the starting amount.
Why? I don't know

Is there a configuration on PSP programm to apply ?
And on hardware side?

Thank you

Title: Re: MIKOHN SUPER CONTROLLER CON2 and IGT PE+ (prog doesn't back to starting amount)
Post by: qbert on April 29, 2022, 06:23:53 AM

Could this have happened?

JACKPOT RESET

Don't just turn the key!  Otherwise, the machine might interpret the key-turn as a "coin-in".  This will result in the music being stopped, but the progressive amount will not reset back to zero.  You actually have to TURN AND HOLD the key for about 5 seconds.  This should not only reset the jackpot, but set the progressive back to the starting amount as well.  If you did turn it too fast, you'll have to use the PSP Software again to reset the jackpot.