New Life Games LLC

Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff => Other Arcade and Amusement Games => Topic started by: strife on February 28, 2024, 06:44:12 PM

Title: uWink SNAP!
Post by: strife on February 28, 2024, 06:44:12 PM
Hello, I have searched for any information I could find on these games and I have come up short. Does anybody have experience with these countertop games? I have one that had the monitor removed from it and I don't know what touch screen is compatible with it. I have tried four styles of Microtouch- 2 serial and 2 USB styles as well as an ELO serial controller. It displays "No touch screen found" when trying to calibrate it. Any help would be appreciated. Thank you.
Title: Re: uWink SNAP!
Post by: Stayouttadabunker on February 28, 2024, 09:57:23 PM
Grab your camera...start taking pictures.
This sounds like an arcade type of game, not slot machine?
Show us the main board and the wiring connections.


Oh I found it...It came out in 2004...it's old, outdated, no-longer-supported stuff.
Get in touch with these guys in the link below...see if they're still in business.
I'm going to say probably not.
If they're around, they must have replacement LCDs for it...>>>

https://www.highwaygames.com/arcade-machines/snap-8952/ (https://www.highwaygames.com/arcade-machines/snap-8952/)

They're website is at: http://www.uwink.com (http://www.uwink.com).
Like I said, probably outta the biz.

uWink, Inc.
Address: 5443 Beethoven St.Los Angeles, CA 90066 U.S.A.
Phone: 310-827-6900
Title: Re: uWink SNAP!
Post by: strife on March 02, 2024, 04:44:36 PM
Thank you for the reply. Here are some photos of the machine. It is similar to a Megatouch or Midway Infinity counter top game. I can attempt to calibrate the touch screen when I hold down the test button. One of the photos attached displays the error. The monitor I'm using was from a jukebox and not original. That is where I am hung up because the original display was thrown out prior and I never got to see what touch screen it used. I would assume Microtouch from this time frame of 2004, but nothing I have tried has worked.
SimplePortal 2.3.5 © 2008-2012, SimplePortal