New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => IGT PE and PE Plus Poker Games => Topic started by: Tod on April 04, 2021, 04:38:49 PM

Title: IGT PE+ Only the deal draw button works.
Post by: Tod on April 04, 2021, 04:38:49 PM

Hello, I have searched the forums for an answer, but couldn't find what I needed. I have a 1997 custom cabinet IGT PE +  Super board with 5 poker games  that had a white screen only. That problem was taken care of with a new monitor. Got it up and running but now only the deal draw button works (can't hold any cards with any of the other ones.) Does anyone have a wiring diagram for the buttons? Or if anyone has run across this problem and has a cure, that would be great also. Thanks, Tod

Title: Re: IGT PE+ Only the deal draw button works.
Post by: knagl on April 04, 2021, 11:32:05 PM

Congrats on getting the game up and running. I don't have a wiring diagram, but I will note that the buttons are wired in series. If even one of the wires is incorrect it can cause everything after it in the series to fail.

The self-test inputs page on your machine (open the door and press the self test button once) should be useful in troubleshooting as you can see if the machine is detecting a button as pressed on the display.

Title: Re: IGT PE+ Only the deal draw button works.
Post by: Tod on April 05, 2021, 04:01:14 PM

Can anyone tell me if these look to be wired right? I don't have a wiring diagram. These are the hold buttons that wont work. the rest of them do, the bet one, the max bet, and deal draw all work. Thanks

Title: Re: IGT PE+ Only the deal draw button works.
Post by: Tod on April 06, 2021, 06:59:56 PM

Finally up and running! Had to run a ground to all the hold buttons, I'll figure out why at a later time.