New Life Games LLC

**Video Poker, Keno, Slots, 21** Gaming machines => Aristocrat Video Gaming Machines => Topic started by: Don Indallas on February 24, 2022, 03:09:06 PM

Title: Mk6 boot up issues
Post by: Don Indallas on February 24, 2022, 03:09:06 PM
Mk6 Pompeii showed logic door open error.  I changed the battery on the I/O board.  When it booted up next, several of the buttons didn't work.  After removing both the logic and I/O boards and reinstalling them, it was difficult to get the No Signal display to go away.  I pushed the boards in harder, and now it boots to the play screen, but has errors.  It says Watchdog Reset and BACC Signature Mismatch.   Also play buttons 1-2, 1-3 1-5 and bet button 2 are the only ones working.  I can't get into the diagnostic or test menus because the buttons aren't working.  Will a ram clear fix this or do I have other issues?
Title: Re: Mk6 boot up issues
Post by: Shaneomac on February 24, 2022, 06:50:46 PM
last time i had no buttons working it was my driver board. ours is smaller in australia and doesnt have batteries. but when it fails i get all sorts of weird errors and the buttons dont light up or work.
Title: Re: Mk6 boot up issues
Post by: Don Indallas on February 24, 2022, 07:04:51 PM
I'll try swapping the driver board out with another one tomorrow.  I sure hope that it's that board!
Title: Re: Mk6 boot up issues
Post by: Don Indallas on February 25, 2022, 08:55:44 AM
Problem solved!  The I/O board wasncompletely seated.  I had to use a fair amount of force to seat it, and now everything is working properly. 
SimplePortal 2.3.5 © 2008-2012, SimplePortal