New Life Games LLC
**Reel Slots** Gaming Machines => Bally Alpha Reel Games => Topic started by: YYZ on April 24, 2014, 11:45:35 AM
-
:Scratch-Head:
Hello all.
I'm new to the Alpha scene, and seeing how these machines suck up money faster than a crooked lawyer, was hoping to install a TITO board.
Are the settings the same as on an S2000, or are there settings specific to this machine?
Thank you in advance for any assistance.
-
They are different. I just installed one on mine. I will post screen shots of the settings if you want.
-
Yes, please do. I appreciate your help.
-
will post tomorrow when I get access to a machine.
-
Not sure which TITO product you have but I attached our installation manual if that helps. And since you mention a S2000 in your first post, if you are moving this setup from a S2000 then you should note that the serial harness is slightly different from the one used in the IGT machines so you might want to verify which one you have by posting pictures of it.
-
Cool! :cool_thumb_up: Thanks a bunch for the setup guide. The setup is much simpler than I expected. I haven't been through a clear on one of these yet, but am looking to jump into it over the weekend. I'll be taking pictures of every screen before clearing, since I am absolutely sure I will screw something up.
BTW, I have that other, basic TITO setup and an extra serial cable designed to work with the Alpha.
Thanks again for your help!