**Reel Slots** Gaming Machines => IGT S and S-plus Reel Games => Topic started by: rlebida on December 30, 2023, 04:00:42 AM
Title: 3200 error code will not clear
Post by: rlebida on December 30, 2023, 04:00:42 AM
Just bougnt a IGT S plus 5 times pay With a 3200 code that won't clear. tested hopper and its working fine any Ideas
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on December 30, 2023, 06:23:52 AM
"any Ideas" :rotfl: :NLG_WELCOME: I'd like to know how did you "Test the hopper"?
[3200] means "Coin-Out Tilt". In other words, the MPU sensed that the hopper motor was drawing too much amperage from the power supply in attempt to turn the wheel. Normally the cause is from a jammed coin between the wheel and the hopper bowl.
Secondly, can you test the door optics? Watch the [Coins Played] window on the reel glass as you push down on the door latch. When the door latch is at the bottom of the slot, whatever number displayed should go out momentarily, then come back on. The [3200] code should be gone.
Title: Re: 3200 error code will not clear
Post by: shortrackskater on December 30, 2023, 09:09:43 AM
Topic moved to IGT S plus
Title: Re: 3200 error code will not clear
Post by: rlebida on January 01, 2024, 11:45:35 AM
the hopper test was done in the test mode, and it spit out 10 coins. i did push up and down on the door to check optics. the optic for the hopper is round were as the coin hits it the coin makes contact and lifts it up as it rolls threw I also replaced the motor and no change.its game chip is a 731
Thanks for your help
Title: Re: 3200 error code will not clear
Post by: Jim on January 01, 2024, 03:51:01 PM
since you know how to get into the test mode, get to test 10_1, use the change button to advance to 13_1, now close and latch the door, the 13_1 should now start alternating _0,_1,_0,_1 etc, if it does not do this then you door optics are not working, if they don't work, you can't clear any tilt codes.
Hope this helps
Jim
Title: Re: 3200 error code will not clear
Post by: rlebida on January 01, 2024, 06:45:53 PM
thanks for the help this site is great . up date on my 3200 code not clearing it does clear for a few second spits out about 2 coins or no coins hums and the 3200 code comes back motor has been replaced and hopper test does spit out 10 coins this is mind blowing.
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 01, 2024, 07:00:58 PM
It seems like the MPU "sees" your door closing, but can you do the [13-0] door optics Test, as Jim suggested? :Scratch-Head:
Title: Re: 3200 error code will not clear
Post by: rlebida on January 02, 2024, 08:25:14 AM
thanks for such a quick response tonight i am going to clean the hopper and do the 13 tests will post results.
Title: Re: 3200 error code will not clear
Post by: rlebida on January 09, 2024, 01:31:54 PM
the door optics tested fine The 3200 code does clear until you hit a paid out but i am having trouble in the test mode also when I push the test Butten twice with no credits in the credits window I get 00 not 2 n n= 1,2,0r 3 going to try doing a video to help explain it better
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 09, 2024, 02:26:32 PM
Press the Test button until you see a [10-1] in the [Winner Paid] window and a "1" in the [Coins Played] window. You may have to press the Test button up to 3 or 4 times to get that page option. It's PAST the double zero option page.
When you see the [10-1] in the [Winner Paid] window, turn the J/P Key 3 times to get to [13-0]. Close the door, push the door latch all the way down, and it should alternate between [13-0] and [13-1] fairly rapidly. If so, then your door optics are good.
Here's how to do it if you have the long reel glass display...>>>
Ugh...sorry for all the mumble jumble...I was trying to embed the video I just made into this Reply. I don't know how to do it. FIXED by the other Mark :yes:
The green link DOES work tho! :)
Title: Re: 3200 error code will not clear
Post by: rlebida on January 10, 2024, 03:19:42 AM
yes, I did do the test and the door optics worked fine.
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 10, 2024, 06:49:07 AM
Sounds like you're able to clear the [3200] code by closing the door. But when you get a win, the hopper jams up. You've changed the motor but the problem may be the wheel shelf and the coins youre using. Can you put a few coins on top of the wheel shelf and take a photo for us? I want to see if the coins are too big for the hopper set-up.
What I'm getting at here is if you have quarters in hopper that has a nickel shelf, it can jam up in the bottom of the bowl, causing the [3200] error. It would be good if you can take a short video of the hopper running as you do the 10-credit hopper test. Members might be able to spot the problem. Also, you may have installed the motor wrong or something is wrong with the transmission. Over-exceeding the amperage needed to turn the motor is what shoots out the error...the machine thinks the hopper is jammed up.
Title: Re: 3200 error code will not clear
Post by: rlebida on January 10, 2024, 08:54:42 AM
Hi guys a little update wile am getting together a video Did a hopper test today and the hopper spit out coins continuity till I turned machine off is that suppose to happen!
Title: Re: 3200 error code will not clear
Post by: sixcardmark on January 10, 2024, 09:15:25 AM
Clean the hopper optics.
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 10, 2024, 09:21:55 AM
Now it sounds like you got rid of the [3200] code! :applause:
Maybe you didn't put it back together right, because it's not counting the coins going thru the optics? :Scratch-Head: Yours has a roller that bumps up as a coin passes under it. On the backside, there's a metal lever. That lever part is what passes thru the optical beams. They put it back there to fool the people that were making light cheat sticks.
Title: Re: 3200 error code will not clear
Post by: rlebida on January 12, 2024, 08:51:46 AM
Up Date,Cleaned coin optics and still won't stop spitting out coins continuously when I do the hopper test ordered new coin optics. Hoping that will do the trick. :Scratch-Head:
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 12, 2024, 09:33:37 AM
...won't stop spitting out coins continuously when I do the hopper test...
Look at the [Winner Paid] window on the reel glass display...is it counting each coin going thru the optics? It shouldn't count any higher than "10" when doing the hopper <3> test. If it's not counting, then either your optics are blown, or the hopper optics wiring isn't hooked up right. Let's see how you hooked them up? :Take_a_Photo:
Title: Re: 3200 error code will not clear
Post by: rlebida on January 12, 2024, 12:48:55 PM
I will send a pic soon For now I will try to give you a general idea
looking at the mail plug on the hopper. Looking at the back of the hopper with male plug on your left motor on your right
top solid red to coin optic top yellow to coin optic middle solid green grounded to hopper base middle orange /white side of hopper bottom white and black to top of motor bottom red and white going lower part of motor
Title: Re: 3200 error code will not clear
Post by: Jim on January 12, 2024, 04:07:54 PM
listen, you don't need the black cover and the roller part, take them off and mount the horseshoe shaped optic directly to the hopper.
should be a picture somewhere to show this ,
be advised, you will have to use a shorter screw then provided, it will extend into the pin wheel area and could hamper the wheel from turning.
try this and see if it will fix your problem.
Hope this helps
Jim
Title: Re: 3200 error code will not clear
Post by: rlebida on January 12, 2024, 04:26:46 PM
Thanks for a quick response just did that and same problem but I will keep this off I agree its not necessary for home use
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 12, 2024, 05:07:42 PM
Is the green wire from the hopper optics gong to the ground? Run the hopper <3> test again until it spits out 10 coins and stops every time. If not, then you have to wait until the new optics come in.
In Reply #3 you said the hopper <3> test worked spitting out 10 coins, but by Reply #12, it's a runaway hopper. I hope by hooking them up wrong, you only burned out the hopper optics , not anything on the MPU.
Title: Re: 3200 error code will not clear
Post by: rlebida on January 13, 2024, 01:45:55 PM
Thanks for your reply could you tell me what was hooked up wrong the ground from the optics goes to the ground on the base of the hopper.
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 13, 2024, 04:43:28 PM
Not really, we're still waiting for some pictures, you've said you were going to post.
The green wire from the optics goes to the grounding bolt on the hopper chassis. Did you cross the yellow and red wires at any point?
Check the hopper optics with a multimeter to see if they're any good. If they are good, then the problem goes further back. You next step would be to check for continuity between the optics and the 3 other points at the other end of the wiring. See if there's a break in the wiring underneath the covering. Then, check if you have them hooked up to the beau plug on the correct pins. Get out your multimeter & camera.
Title: Re: 3200 error code will not clear
Post by: rlebida on January 22, 2024, 03:38:44 PM
Ok friends this has been solved replaced coin optics with no luck then I replaced the hopper and now it Works perfect.
Title: Re: 3200 error code will not clear
Post by: Stayouttadabunker on January 22, 2024, 04:36:29 PM
yAY! I'm glad you had another hopper to try! :yes: