New Life Games LLC
**Reel Slots** Gaming Machines => Bally Reel Games => Topic started by: drunktek on February 01, 2024, 01:39:37 PM
-
Hey guys what are the correct settings for a bally 6000 with a Dbl Blaz 7s kit. I cant get the mikohn to trigger when the 3 scatttered QHs come up just pays the 1000 credits. Any help would be greatly appreciated
-
Enable progressive, then choose mikohn. Everything else has to be programmed separately into the mikohn box. If that top box has/needs a new battery it will have to be re-programmed afterwards.
-
Thats already setup. The problem is the machine isnt sending jp signal to mikohn
-
Check harnesses and power supply.
-
(https://iili.io/JlTSwyg.th.jpg) (https://freeimage.host/i/JlTSwyg)
Harness and ps are fine as the mikohn recieves the credit singals it just isnt getting a JP signal from machine. Its a machine setting for sure
-
OK probably is, I thought you had an alpha. I don't even mess with older ballys anymore. That 6000 game is also on alpha.
-
OK probably is, I thought you had an alpha. I don't even mess with older ballys anymore. That 6000 game is also on alpha.
Yes I have a few Alphas and they are simple to setup but this ones is a PITA .
-
Have you set the settings in 11d menu of the machine ?
-
Yes I set them up just like you would set up any progressive on a 6000. There is just a setting I seem to be missing that isnt sending a JP signal to the Mikohn
-
Is there a jackpot relay chip in the socket on the backplane?
-
Yes sir. The machine worked fine but hasnt been on in a couple years so had to replace battery and clear. Now after setting it up I appear to be missing 1 important setting in the setup
-
it's always a good idea to post your settings when troubleshooting.
in the machine settings, make sure option:
2 may either be 04 or 05, usually 04 (your setting should be fine as you said it's incrementing)
7 is set to 02, this is what directs it to the scattered, and is probably what you need to fix
18 should be 01
the rest are the usual.
Thanks,
Wayne
-
Decal in my 6000
-
?? Did you check or change your settings as posted above?
-
Sorry was away from home on biz but the setting are as follows
2 4
7 2
18 1
Machine still does not trigger the mikohn. Could the jackpot relay have gone bad?
-
what is your win lockup limit set to? option 58
Thanks,
Wayne
-
58 800
-
Did you try option 2 set to 5?
W
-
Did you try option 2 set to 5?
W
I assume if I want to change that option I would have to do a clear?
-
From memory, I don't think a clear is necessary. No credits on the machine though.
Thanks,
Wayne
-
option 2 5 is set
same result machine locks up and bell goes off but doesnt trigger mikohn when the 3 QHs are hit
-
Ok, the cham ii settings need to be checked next.
PSP:
F3-Many
F4-M08
F8-MS00
Thanks,
Wayne
-
78 Lo set to 1 ?