New Life Games LLC
**Reel Slots** Gaming Machines => IGT S2000 and Vision Games => Topic started by: Jasonmichael on September 05, 2016, 04:27:53 PM
-
Check out a video of the problem on this link: https://youtu.be/deayMI7HExI
In the video I switch reel 2 and 3 and the problem sustains with the center reel location.
All optics are solid (checked and rechecked).
Any thoughts?
Thanks, all!
Jason
-
I would try a different mpu board to rule out a bad reel control chip. If that doesn't fix it, I would look at wiring.
-
Had similar problem before and it was the Mpu.
-
I'm guessing that it too. Thanks!
-
Finally changed out the MPU and all is fine. Thanks all!
-
Glad to hear you got it working. The mpu is usually the problem