New Life Games LLC
**Video Poker, Keno, Slots, 21** Gaming machines => Bally EVO and EVO hybrid. => Topic started by: john398 on October 06, 2016, 07:39:43 AM
-
I am assuming this maybe a grounding issue but I am not sure
My EVO unit was laying on its back for about 6 months while I worked on it, I finally got it working so had a friend move it into the how and in the upright position, I did remove the suitcase before the move
Now with suitcase reinserted monitor does not power up at all, I am getting a video signal as I have hooked up to a different monitor as a test, of course that monitor does not have touchscreen so cannot use it I do not think
Anyway can someone point me to a link or tell me what to troubleshoot first
Thanks
-
I'm confused (as usual) - so the machine appears to have no power at all with the correct monitor but, with a replacement monitor there IS power?
If you have a CRT (I assume), carefully check the internal plugs (like the one to the picture tube itself) but watch out as it may have some :lightningbolt: :lightningbolt: in it. So, you may want to discharge the CRT first if you know how.
Report back.
-
I'm confused (as usual) - so the machine appears to have no power at all with the correct monitor but, with a replacement monitor there IS power?
If you have a CRT (I assume), carefully check the internal plugs (like the one to the picture tube itself) but watch out as it may have some :lightningbolt: :lightningbolt: in it. So, you may want to discharge the CRT first if you know how.
Report back.
D
sorry to confuse you, theres no display to the monitor the video out to an external monitor that I use for my computer it gets a display so I know video out is working on the suitcase
'yes its a CRT I will check internal plugs.
maybe see where the main power is for the internal monitor
-
I took screws off the CRT and noticed the led thats by the horizontal vertical controls does not light, should this be lit above the CRT when the slot unit is on?
-
It sounds like you might not be getting power to the CRT. When you power up, is there any static on the screen that you can feel?
-
It sounds like you might not be getting power to the CRT. When you power up, is there any static on the screen that you can feel?
no static at all, I would expect at least a message saying loss video single, tube in back also does not glow, so I think your right
-
Can you check the plug where the chassis slides into? It's probably fine but once in a while the pins can get shoved back out of the housing. Same thing for the CRT side, although those are usually fine.
-
Can you check the plug where the chassis slides into? It's probably fine but once in a while the pins can get shoved back out of the housing. Same thing for the CRT side, although those are usually fine.
when you say where chassis slides into do you just mean the monitor chasis? I know they suitcase and the cpu most be connected fine because all the lights come on, I did not realize monitor slides out on a chasis too I will check that
-
Can you check the plug where the chassis slides into? It's probably fine but once in a while the pins can get shoved back out of the housing. Same thing for the CRT side, although those are usually fine.
that was it the monitor came loose from its plug, thanks so much
-
Glad to hear. :applause:
Post a picture of the working machine when you can.
-
Glad to hear. :applause:
Post a picture of the working machine when you can.
here you go
-
Looks great!
But, you've got Blazing 7's software and the Beach Party glass.
-
Looks great!
But, you've got Blazing 7's software and the Beach Party glass.
yes I bought it off ebay for $10 local pickup, did not realize the softwware did not match the panels til I got home, the guy I bought it from said he got it at an estate sale and could not get it working . I had to do clear ram and replace battery and it worked, Maybe one day I can find beach party cd and eProm