New Life Games LLC
Progressive Controllers and Displays => Mikohn Progressive Systems => Topic started by: blazing7scolorado on February 19, 2017, 03:26:02 PM
-
Hi everyone, I have a Mikohn progressive system with PSP software and a real RS232 port on an older PC that I'm looking to get up and running. I know there are guides here that give instructions on how to modify the cable for use with the system and I actually have a printout of the crossover schematic, but my time is limited and the few smaller shops in the area don't have a clue. Tried at least borrowing one from work but got a no. I was wondering if there's anyone out there that can possible make one if I of course send you the cable itself (I'm planning on a 25 footer) and whatever service fee you might charge? PM me if possible. Thanks!
blazing7scolorado
-
Hey Blazin...
If I could build one, it should be a piece of cake for you.
I got the ends from Amazon.
I got the diagrams/instructions from another post. [see attachment]
It was a 10 minute job. All you need is a screwdriver! A small screwdriver.